Since I have changed paths I receive error message when running the cfg file.
C:\>perl p:\storage\mrtg\bin\mrtg p:\storage\inetpub\wwwroot\mrtg\configuration\ devices\belgium\be001s022.cfg ERROR: CFG Error in "workdir", line 10: Working directory /STORAGE/INETPUB/WWWRO OT/MRTG/PRODUCTION/ does not exist RRD is installed in P:\Storage\RRDTOOL MRTG is installed in P:\Storage\MRTG Off course I cannot use a P drive in the WorkDir path cause perl/MRTG can't handle that. Even it gives an error it is still updating CPU values in the graphs? Only the memory value isn't being updated, but I can query the value via snmpget. This is a cfg file from the server. ###################################################################### # # MRTG Config file for BE001S022 # Contains: SNMP-Informant MIB & IIS webfolder # ###################################################################### ### Global Defaults WorkDir: /STORAGE/INETPUB/WWWROOT/MRTG/PRODUCTION/ LoadMIBs: /STORAGE/INETPUB/WWWROOT/MRTG/MIBS/WTCS.MIB, /STORAGE/INETPUB/WWWROOT/MRTG/MIBS/INFORMANT-STD.MIB, /STORAGE/INETPUB/WWWROOT/MRTG/MIBS/RFC1271-MIB, /STORAGE/INETPUB/WWWROOT/MRTG/MIBS/RFC1213-MIB, /STORAGE/INETPUB/WWWROOT/MRTG/MIBS/RFC1155-SMI LogFormat: rrdtool PathAdd: P:/STORAGE/RRDTOOL/PERL-SHARED/t LibAdd: P:/STORAGE/RRDTOOL/PERL-SHARED Interval: 5 XSize[_]: 380 YSize[_]: 100 ###################################################################### ###################################################################### # # BE001S022 (Win2k) - CPU # ###################################################################### Target[BE001S022.cpu]: 1.3.6.1.4.1.9600.1.1.5.1.5.1.48&0:[EMAIL PROTECTED] MaxBytes[BE001S022.cpu]: 100 Directory[BE001S022.cpu]: BE001S022 Title[BE001S022.cpu]: CPU Utilisation Options[BE001S022.cpu]: growright, gauge, nopercent, integer, nolegend, nobanner, noinfo, noo Unscaled[BE001S022.cpu]: dwmy YLegend[BE001S022.cpu]: Utilisation (%) ShortLegend[BE001S022.cpu]: % LegendI[BE001S022.cpu]: CPU1 LegendO[BE001S022.cpu]: PageTop[BE001S022.cpu]: <b>CPU Utilisation</b> ###################################################################### Any suggestion to solve the issue? Thanks in advance. Kind Regards, Jo -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
