Hi, I've also encountered the same problem after upgrading from 1.0.49 to 1.2.9.
The left hand side of the image has extra space between the Vertical Label and the Y-axis on some graphs, depending on the data used. I've been able to correlate the expansion to the size of the "raw" number on the Y-axis. For example, if an interface has sent at 10Mbps, I believe the space displayed is calculated on the raw number 10,000,000 before it's converted and displayed as a nice (and small) "10M" on the Y-axis. The faster your interfaces send, the wider the graphs get! Also, I believe this only happens when the DS is a COUNTER. The extra space doesn't appear on my graphs when the DS is a GAUGE. Regards, Kobe Mischa Peters wrote: > > Hi All, > > I have just upgraded my rrdtool from 1.x to 1.2.9. Everything still works great. > But it seems that the width of the image changes. Even if I specify it > on the command line. > > I'm also trying to make the images look like the ouput of rrdgraph in > 1.0 but I can not find the font used in 1.0. > > Any help is appriciated. > > Mischa > _____________________________________________________________ This email, including any attachments, may be confidential or privileged, and is sent for the personal attention of the intended recipient. If you have received this email in error, please delete it immediately . The views expressed are not necessarily those of the Rabobank Group. The Group is not liable for the effects of any virus which may be contained in this email. _____________________________________________________________ If this e-Mail contains marketing material and you do not wish to receive such material by e-Mail in future, please reply to this e-Mail and place the words "Remove My Details - Electronic Messages" in the Subject Header. The Rabobank Group Australia: 1800 025 484 New Zealand: 0800 500 933 -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/rrd-users WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
