Hi The heartbeat matches the update time frames. What tolerance does RRDtool have for offsets? (in the example you can see that both examples have an offset of +2 seconds, yet one is accepted, and the other is not.) Can I tune the tolerance?
Thanks, Dan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alex van den Bogaerdt Sent: Thursday, December 28, 2006 4:23 PM To: [email protected] Subject: [rrd-users] Re: Missing data entries On Thu, Dec 28, 2006 at 09:06:09AM +0200, Dan Amitai wrote: > Why do I get two sets of each? Why are values NaN although the command > line parameters seem OK? > > BTW the timestamp in this case is 2 seconds gap to the required update > time. And usually, not more than a few seconds. You used an odd way to describe your problem. From what I could tell, you have a heartbeat setting that closely matches your step size. "Not more than a few seconds" can still be "too much". HTH -- Alex van den Bogaerdt http://www.vandenbogaerdt.nl/rrdtool/ -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/rrd-users WebAdmin http://lists.ee.ethz.ch/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/rrd-users WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
