Hi Piers. Multiple Y axes aren't currently possible (I had the requirement as well) in RRDTool. In my case, I pulled the data from an RRD and used the GD::Graph Perl module, with its 'two_axes' parameter, to graph them. See
http://gdgraph.com/samples/sample57.html for a basic example or two that should get you going in the right direction. David On 29/09/2007, Piers Kittel <[EMAIL PROTECTED]> wrote: > Hello all, > > Have started a new RRD for system sensors (CPU temp, mobo temp, CPU > fan etc) and have made a graph for temperatures only, and I'd think > it'd be interesting if I add in a line showing load averages (I > already have recorded this for 2 years or so) as the higher the load > average, the higher the temps are. Anyway, I've made a graph with > all 3 data - CPU temp, motherboard temp and load average. Obviously > the graph has a y axis of 0 - 50, so load average is almost a flat > line at the bottom. Here's what I mean: > > http://www.biased.org/rrdtool/sensors.png > http://www.biased.org/rrdtool/loadaveragesdaily.png > > Is it possible to have the load average line on the sensors graph to > look like the one in the load average graph? I.e. have 2 Y axis (not > sure of the technical name for this, sorry), one on left and one on > right, the lines refer to whichever one is relevant, a bit like this > one http://www.scielo.cl/fbpe/img/imar/v31n2/pag49.jpg ? > > Thanks very much for your time! > > Regards - Piers > > _______________________________________________ > rrd-users mailing list > [email protected] > https://lists.oetiker.ch/cgi-bin/listinfo/rrd-users > _______________________________________________ rrd-users mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/rrd-users
