try this: rrdtool create <file name> --step 1 \ DS:Test:GAUGE:15:0:u \ DS:Test1:COUNTER:15:0:u \ RRA:AVERAGE:0.5:1:50
---------------------------------- After the file is created issue the command: rrdtool update <file name> N:100:100 Execute it couple of times (maybe 5 times, just to be sure.. hehehe) then fetch the files... You should see 0.0000e+0 or something like this and not NaNs. Have worked? On both DSs? []'s Lívio Zanol Puppim 2007/12/7, İlker Aktuna (Koç. net) <[EMAIL PROTECTED]>: > > > > > Hi, > > > > Thanks for your reply. > > In fact, I tried to make a simpler test with 1 DS, something like: > > > > rrdtool create x.rrd \ > > DS:test1:DERIVE:100:U:U \ > > RRA:AVERAGE:0.5:48:24 \ > > RRA:AVERAGE:0.5:1488:31 > > > > rrdtool update x.rrd N:13 > > rrdtool update x.rrd N:30 > > rrdtool update x.rrd N:45 > > > > But I couldn't get any values: > > > > rrdtool fetch x.rrd AVERAGE > > test1 > > > > 1196928000: NaN > > 1196942400: NaN > > 1196956800: NaN > > 1196971200: NaN > > 1196985600: NaN > > 1197000000: NaN > > 1197014400: NaN > > > > So, I believe that my build has some problems (although it was compiled > successfully) > > What do you suggest ? > > > > Thanks, > > > > > > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Livio Zanol Puppim > Sent: Friday, December 07, 2007 1:13 AM > To: [email protected] > Subject: [rrd-users] rrdtool first use - all NaN > > > > > > Just a stupid question: > > > > > > Have you tried to update it more than once? You need 2 updates to get > values... You can try it by creating the same RRD file with step 1 and > repeat sometimes the command that you have used... > > > > > > If you are updating the RRD every 30 minutes, your step must be 1800, and > you must wait 1 hour to see any data. You could also make the "1800" > parameter in your DSs a little bigger > > > Ex.: DS:DYB1-OUT:GAUGE:1800:0:100 > > > > > > > > > "From rrdtool documentation: > DS:ds-name:GAUGE | COUNTER | DERIVE | ABSOLUTE:heartbeat:min: max > > > heartbeat defines the maximum number of seconds that may pass between two > updates of this data source before the value of the data source is assumed > to be *UNKNOWN*. > > min and max define the expected range values for data supplied by a data > source. If min and/or max any value outside the defined range will be > regarded as *UNKNOWN*. If you do not know or care about min and max, set > them to U for unknown. Note that min and max always refer to the processed > values of the DS. For a traffic- COUNTER type DS this would be the maximum > and minimum data-rate expected from the device. > > " > > So, try something like this: > > DS:DYB1-OUT:GAUGE:2000:0:100 > > []'s > > Lívio Zanol Puppim > > > 2007/12/3, İlker Aktuna (Koç. net) <[EMAIL PROTECTED]>: > > > Hi, > > Thanks for your reply. After your reply, I issued the following command to > update with integer values. > But I still get "NaN" > > > bash-2.05# rrdtool update /tmp/rrdbuild/ttkapasite.rrd > N:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25:25 > bash-2.05# /usr/local/rrdtool-1.2.19/bin/rrdtool fetch > /tmp/rrdbuild/ttkapasite.rrd LAST > ADANA2-IN ADANA2-OUT > ADANA3-IN ADANA3-OUT ANK1-IN > ANK1-OUT ANK4-IN ANK4-OUT > ANTALYA2-IN ANTALYA2-OUT > ANTALYA3-IN ANTALYA3-OUT BURSA2-IN > BURSA2-OUT BURSA3-IN BURSA3-OUT > DYB1-IN DYB1-OUT > ERZ1-IN ERZ1-OUT IST4-IN > IST4-OUT IST5-IN IST5-OUT > IST6-IN IST6-OUT > IST7-IN IST7-OUT IST8-IN > IST8-OUT IST9-IN IST9-OUT > ISTG1-IN ISTG1-OUT ISTG2-IN > ISTG2-OUT IZMIR2-IN IZMIR2-OUT > IZMIR3-IN IZMIR3-OUT > IZMIR4-IN IZMIR4-OUT MUGLA1-IN > MUGLA1-OUT SAMSUN1-IN SAMSUN1-OUT > TRABZON1-IN TRABZON1-OUT > > 1196582400: NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > 1196596800: NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > 1196611200: NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > 1196625600: NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > 1196640000: NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > 1196654400: NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > 1196668800: NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > bash-2.05# /usr/local/rrdtool-1.2.19/bin/rrdtool fetch > /tmp/rrdbuild/ttkapasite.rrd AVERAGE > ADANA2-IN ADANA2-OUT > ADANA3-IN ADANA3-OUT ANK1-IN > ANK1-OUT ANK4-IN ANK4-OUT > ANTALYA2-IN ANTALYA2-OUT > ANTALYA3-IN ANTALYA3-OUT BURSA2-IN > BURSA2-OUT BURSA3-IN BURSA3-OUT > DYB1-IN DYB1-OUT > ERZ1-IN ERZ1-OUT IST4-IN > IST4-OUT IST5-IN IST5-OUT > IST6-IN IST6-OUT > IST7-IN IST7-OUT IST8-IN > IST8-OUT IST9-IN IST9-OUT > ISTG1-IN ISTG1-OUT ISTG2-IN > ISTG2-OUT IZMIR2-IN IZMIR2-OUT > IZMIR3-IN IZMIR3-OUT > IZMIR4-IN IZMIR4-OUT MUGLA1-IN > MUGLA1-OUT SAMSUN1-IN SAMSUN1-OUT > TRABZON1-IN TRABZON1-OUT > > 1196582400: NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > 1196596800: NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > 1196611200: NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > 1196625600: NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > 1196640000: NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > 1196654400: NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > 1196668800: NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN NaN > NaN NaN NaN NaN NaN NaN NaN NaN > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto: > [EMAIL PROTECTED] On Behalf Of Eduardo M. > Bragatto > Sent: Friday, November 30, 2007 9:32 PM > To: [email protected] > Subject: Re: [rrd-users] rrdtool first use - all NaN > > İlker Aktuna ( Koç.net) wrote: > > > rrdtool update /tmp/rrdbuild/ttkapasite.rrd -t ADANA3-OUT N:35.48 > > Although other users said here that GAUGE supports floating point > numbers, Edward Quick had the same issue as you and fixed by multiplying > the values by 10 a few times in order to make the numbers integer before > inserting them and he said it work (i.e. inserting 3548 instead of 35.48). > > Look at the archives for a recent thread with subject "unexpected > NANs". > > []s > Eduardo M. Bragatto. > > _______________________________________________ > rrd-users mailing list > [email protected] > https://lists.oetiker.ch/cgi-bin/listinfo/rrd-users > _____________________________________________________________________________________________________________________________________________ > Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger > bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde > kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta > mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj > kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac > icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta > mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak > yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol > ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek > zararlardan dogacak hicbir sorumlulugu kabul etmez. > This message is intended solely for the use of the individual or entity to > whom it is addressed , and may contain confidential information. If you are > not the intended recipient of this message or you receive this mail in > error, you should refrain from making any use of the contents and from > opening any attachment. In that case, please notify the sender immediately > and return the message to the sender, then, delete and destroy all copies. > This e-mail message, can not be copied, published or sold for any reason. > This e-mail message has been swept by anti-virus systems for the presence of > computer viruses. In doing so, however, sender cannot warrant that virus > or other forms of data corruption may not be present and do not take any > responsibility in any occurrence. > _____________________________________________________________________________________________________________________________________________ > > _______________________________________________ > rrd-users mailing list > [email protected] > https://lists.oetiker.ch/cgi-bin/listinfo/rrd-users > > > > _____________________________________________________________________________________________________________________________________________ > Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger > bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde > kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta > mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj > kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac > icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta > mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak > yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol > ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek > zararlardan dogacak hicbir sorumlulugu kabul etmez. > This message is intended solely for the use of the individual or entity to > whom it is addressed , and may contain confidential information. If you are > not the intended recipient of this message or you receive this mail in > error, you should refrain from making any use of the contents and from > opening any attachment. In that case, please notify the sender immediately > and return the message to the sender, then, delete and destroy all copies. > This e-mail message, can not be copied, published or sold for any reason. > This e-mail message has been swept by anti-virus systems for the presence of > computer viruses. In doing so, however, sender cannot warrant that virus > or other forms of data corruption may not be present and do not take any > responsibility in any occurrence. > _____________________________________________________________________________________________________________________________________________ _______________________________________________ rrd-users mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/rrd-users
