Hi all,

The poll below is now closed.  We received 21 responses.  Of those, one is 
clearly a poor prank and another was amended.  Both of these responses are 
ignored, leaving 19 valid responses.

The statements or definitions received the following responses in agreement:

A1) 17  =>  89%
A2) 15  =>  79%
A3) 17  =>  89%
A4) 18  =>  95%
B) 14    =>  73%
C) 14    =>  73%
D) 13    =>  68%
E) 17    =>  89%


Based on this, I find that we have rough consensus in favor of all of these 
definitions, and we will incorporate these into the recommendation document.

Once again, I hope to make another editorial pass through the document (as soon 
as my day job permits ;-), so comments, additional terminology or consensus 
agreements are still very much welcome.


Regards,
Tony



On Jun 10, 2010, at 2:18 PM, RJ Atkinson wrote:

> Hi,
> 
> Here is a terminology straw poll for the Routing RG.  
> As usual, I'm running this using Doodle.  The poll
> lasts 1 week from the date/time of this email note.
> 
> Here is the poll URL:
>       <http://www.doodle.com/dqfyfaigxuggs922>
> 
> 
> My thanks to Noel Chiappa, Dino Farinacci, & Joel Halpern
> (in alphabetical order) for providing corrections 
> to earlier draft versions of these definitions.
> 
> 
> 
> A few quick notes:
> -------------------
> - As before, I can't edit the statements during the poll,
>  because it obfuscates the meaning of votes that occurred
>  before the edit occurred.
> - The "A" terms are pretty widely used today.
> - The B through E terms are not uncommon today,
>  but are a bit newer than ancient terms like 
>  "bridge" or "router".
> 
> 
> 
> A1) A "node" is either a host or a router.  
> 
> A2) A "router" is any device that forwards packets at the 
>  Network Layer (e.g. IPv4, IPv6) of the Internet Architecture.  
> 
> A3) A "host" is a device that can send/receive packets 
>  to/from the network, but does not forward packets.  
> 
> A4) A "bridge" is a device that forwards packets at the 
>  Link Layer (e.g. Ethernet) of the Internet Architecture.  
>  An Ethernet switch or Ethernet hub are examples of bridges.
> 
> 
> B) An "Address" is an object that combines aspects of identity 
>  with topological location.  IPv4 and IPv6 addresses are 
>  current examples.
> 
> 
> C) A "Locator" is a structured topology-dependent name that 
>  is not used for node identification, and is not a path.  
>  Two related meanings are current, depending on the class 
>  of things being named:
>       1) The topology-dependent name of a node's interface.
>       2) The topology-dependent name of a single subnetwork
>          OR topology-dependent name of a group of related 
>          subnetworks that share a single aggregate.   An 
>          IP routing prefix is a current example of this last.
> 
> 
> D) An "Identifier" is a topology-independent name for a logical 
>  node. Depending upon instantiation, a "logical node" might be 
>  a single physical device, a cluster of devices acting as a 
>  single node, or a single virtual partition of a single physical 
>  device.  An OSI End System Identifier (ESID) is an example of 
>  an identifier.  A Fully-Qualified Domain Name that precisely 
>  names one logical node is another example. (Note well that not 
>  all FQDNs meet this definition.)
> 
> 
> E) Various other names (i.e. other than addresses, locators, 
>  or identifiers), each of which has the sole purpose of 
>  identifying a component of a logical system or physical device, 
>  might exist at various protocol layers in the Internet Architecture.
> 
> 
> EOF
> 
> 
> 
> _______________________________________________
> rrg mailing list
> [email protected]
> http://www.irtf.org/mailman/listinfo/rrg

_______________________________________________
rrg mailing list
[email protected]
http://www.irtf.org/mailman/listinfo/rrg

Reply via email to