https://bugzilla.samba.org/show_bug.cgi?id=11578
--- Comment #3 from Armin Mohring <armin_mohr...@web.de> --- This is the relevant part from dmesg after connecting the drive to an USB 3.0 port: 5773.601144] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 5777.829686] usb 4-3: new SuperSpeed USB device number 6 using xhci_hcd [ 5777.841134] usb 4-3: New USB device found, idVendor=0bc2, idProduct=3320 [ 5777.841139] usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 5777.841142] usb 4-3: Product: Expansion Desk [ 5777.841144] usb 4-3: Manufacturer: Seagate [ 5777.841146] usb 4-3: SerialNumber: NA4MVF15 [ 5777.843264] scsi8 : uas [ 5777.843690] scsi 8:0:0:0: Direct-Access Seagate Expansion Desk 0712 PQ: 0 ANSI: 6 [ 5777.844184] sd 8:0:0:0: Attached scsi generic sg8 type 0 [ 5777.844251] sd 8:0:0:0: [sdh] Spinning up disk... [ 5778.843059] .......ready [ 5784.839976] sd 8:0:0:0: [sdh] 488378645 4096-byte logical blocks: (2.00 TB/1.81 TiB) [ 5784.857762] sd 8:0:0:0: [sdh] Write Protect is off [ 5784.857767] sd 8:0:0:0: [sdh] Mode Sense: 4f 00 00 00 [ 5784.857935] sd 8:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5784.858486] sd 8:0:0:0: [sdh] 488378645 4096-byte logical blocks: (2.00 TB/1.81 TiB) [ 5784.881361] sdh: sdh1 [ 5784.881816] sd 8:0:0:0: [sdh] 488378645 4096-byte logical blocks: (2.00 TB/1.81 TiB) [ 5784.882346] sd 8:0:0:0: [sdh] Attached SCSI disk -- You are receiving this mail because: You are the QA Contact for the bug. -- Please use reply-all for most replies to avoid omitting the mailing list. To unsubscribe or change options: https://lists.samba.org/mailman/listinfo/rsync Before posting, read: http://www.catb.org/~esr/faqs/smart-questions.html
