On 19/03/18 14:01, Morgan Read wrote:
Hello list
I've been running the following command, first in fc20 and then now
(since the beginning of March) in fc26:
now=$(date +"%Y%m%d-%H%M"); sudo rsync -ahuAESX -vi /home/
/run/media/readlegal/Backup/home >
/run/media/readlegal/Backup/rsync-changes_$now
Since the move to fc26, this command has caused the complete
freeze/crash of the system. I tried it under multi-user non-graphic
mode in case it was something to do with new graphics systems (don't
know why). The output of the above always stops at:
sending incremental file list
.d..t...... Music/FLACs/Various_Artists/Temple_Sampler/
>f+++++++++
Music/FLACs/Various_Artists/Temple_Sampler/13-brian_mcneill-the_butterfly_chain.flac
(total 183 bytes file size, always)
By complete freeze/crash I mean:
* hard-drive light indicates spinning, but no noise (activity)
* unable to ssh in
* unable to ping
* in multi-user text, I'm first able to switch to another login console,
but then unable to progress past the login password; after switching to
other consoles, the original login screen attempt has gone blank other
than a blinking cursor top left
* in graphic mode, there's no (inter)activity whatsoever possible -
though screen has desktop on it
* the only apparent solution is a hard reset
The external drive is a WD 750GB hard-drive in a StarTech.com external
hard-drive caddy connected via eSATA cable to an old Dell Vostro 3500.
Any help or suggestions debugging this would be really appreciated.
Many thanks
Morgan.
Did you check the drive for SMART info/errors? Sounds to me like a
hardware problem.
bye Fabi
Thanks Fabian for coming back to me with that - unfortunate, I don't
think the problems is quite so easily solved as getting a new hard-drive :-(
As I mentioned above, all was going well until the upgrade from f20 to
f26 - any help would be really appreciated as I'm without backup and
this is failure leaves me just a tad worried...
Here's the output from smartctl:
$ sudo smartctl -a /dev/sdb
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.15.10-200.fc26.x86_64]
(local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE2 Serial ATA
Device Model: WDC WD7500AYYS-01RCA0
Serial Number: WD-WCAPT0894689
LU WWN Device Id: 5 0014ee 2ac2bb6df
Firmware Version: 30.04G30
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Sun Mar 25 14:27:01 2018 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting
command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (15960) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 198) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0003 191 189 021 Pre-fail
Always - 7425
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 184
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000e 200 200 051 Old_age
Always - 0
9 Power_On_Hours 0x0032 062 062 000 Old_age
Always - 28012
10 Spin_Retry_Count 0x0012 100 100 051 Old_age
Always - 0
11 Calibration_Retry_Count 0x0012 100 253 051 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 81
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always
- 23
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always
- 184
194 Temperature_Celsius 0x0022 134 108 000 Old_age Always
- 18
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Aborted by host 90% 27954
-
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
--
Morgan Read
UNITED KINGDOM
Em: <email:mstuffATreadDOTorgDOTnz>
Confused about DRM?
Get all the info you need at:
<http://drm.info/>
--
Please use reply-all for most replies to avoid omitting the mailing list.
To unsubscribe or change options: https://lists.samba.org/mailman/listinfo/rsync
Before posting, read: http://www.catb.org/~esr/faqs/smart-questions.html
