The ac100 device tree binding specifies the usage of clock-output-names to specify the names of its 3 clock outputs. This is needed for orphan clock resolution, when the ac100 is probed much later than any clocks that consume any of its outputs. This wasn't supported by the driver.
Add support for this. Signed-off-by: Chen-Yu Tsai <[email protected]> --- Changes since v5: - New patch, based on mfd-rtc immutable branch given in http://www.spinics.net/lists/devicetree/msg137991.html --- drivers/rtc/rtc-ac100.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/rtc/rtc-ac100.c b/drivers/rtc/rtc-ac100.c index 70b4fd0f6122..2d0bb02a25d9 100644 --- a/drivers/rtc/rtc-ac100.c +++ b/drivers/rtc/rtc-ac100.c @@ -327,6 +327,8 @@ static int ac100_rtc_register_clks(struct ac100_rtc_dev *chip) .flags = 0, }; + of_property_read_string_index(np, "clock-output-names", + i, &init.name); clk->regmap = chip->regmap; clk->offset = AC100_CLKOUT_CTRL1 + i; clk->hw.init = &init; -- 2.9.3 -- You received this message because you are subscribed to "rtc-linux". Membership options at http://groups.google.com/group/rtc-linux . Please read http://groups.google.com/group/rtc-linux/web/checklist before submitting a driver. --- You received this message because you are subscribed to the Google Groups "rtc-linux" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
