Hi, On 25/08/2016 at 13:19:12 +0200, Marcin Niestroj wrote : > Support configuration of ext_wakeup sources. This patch makes it > possible to enable ext_wakeup and set it's polarity, depending on board > configuration. AM335x's dedicated PMIC (tps65217) uses ext_wakeup to > notify about power-button presses. Handling power-button presses enables > to recover from RTC-only power states correctly. > > Signed-off-by: Marcin Niestroj <[email protected]> > --- > Hi, > > This is a total reimplementation, so it is not based on any of the previos > patch versions. This patch adds support for ext_wakeup using generic pinconf > device-tree bindings, with one added "ti,input-polarity" custom property. > This approach has been suggested by Tony and Grygorii in [1]. > > Patch was developed on 4.6, rebased on 4.8-rc3, tested using chiliBoard. > > [1] http://www.spinics.net/lists/devicetree/msg131516.html > > Documentation/devicetree/bindings/rtc/rtc-omap.txt | 21 +++ > drivers/rtc/Kconfig | 1 + > drivers/rtc/rtc-omap.c | 167 > ++++++++++++++++++++- > 3 files changed, 181 insertions(+), 8 deletions(-) >
I'm fine with this patch and I'll apply it as soon as you fix the comments from Rob. Thanks! -- Alexandre Belloni, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- You received this message because you are subscribed to "rtc-linux". Membership options at http://groups.google.com/group/rtc-linux . Please read http://groups.google.com/group/rtc-linux/web/checklist before submitting a driver. --- You received this message because you are subscribed to the Google Groups "rtc-linux" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
