On 16/09/2016 at 11:26:28 +0200, Marcin Niestroj wrote :
> Support configuration of ext_wakeup sources. This patch makes it
> possible to enable ext_wakeup and set it's polarity, depending on board
> configuration. AM335x's dedicated PMIC (tps65217) uses ext_wakeup to
> notify about power-button presses. Handling power-button presses enables
> to recover from RTC-only power states correctly.
> Signed-off-by: Marcin Niestroj <m.niest...@grinn-global.com>
> This patch adds support for ext_wakeup using generic pinconf device-tree
> bindings, with one added custom property.
> Changes v5 -> v6:
> * Add depends on OF and PINCTRL in Kconfig (found by kbuild test robot)
> Changes v4 -> v5 (suggested by Rob):
> * Don't use GPIO defines in ti,input-polarity, use optional ti,active-high
> boolean instead.
> * Use '-' instead of '_' in node name.
> Changes v1 -> v4:
> * This is a total reimplementation, so it is not based on any of the previous
> patch versions. This approach has been suggested by Tony and Grygorii
> in .
> Patch was developed on 4.7, rebased on 4.8-rc6, tested using chiliBoard.
>  http://www.spinics.net/lists/devicetree/msg131516.html
> Documentation/devicetree/bindings/rtc/rtc-omap.txt | 21 +++
> drivers/rtc/Kconfig | 3 +
> drivers/rtc/rtc-omap.c | 168
> 3 files changed, 184 insertions(+), 8 deletions(-)
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
You received this message because you are subscribed to the Google Groups
To unsubscribe from this group and stop receiving emails from it, send an email
For more options, visit https://groups.google.com/d/optout.