On 20/02/2017 at 18:06:11 +0100, Gregory CLEMENT wrote: > On ven., févr. 17 2017, Gregory CLEMENT <[email protected]> > wrote: > > > The Armada 7K/8K SoCs use the same RTC IP than the Armada 38x. However > > the SOC integration differs in 2 points: > > - MBUS bridge timing initialization > > - IRQ configuration at SoC level > > > > This patch set extends the driver support to these SoCs family. > > > > In this second version the device tree was updated allowing to use the > > RTC on Armada 80x0 SoCs. Indeed on the Armada 80x0, the RTC clock in > > CP master is not connected (by package) to the oscillator. So this one > > is disabled for the Armada 8020 and the Armada 8040. On these SoCs it > > will be the RTC clock in CP slave connected to the oscillator which > > will be used. > > I saw on IRC than Russell managed to have a more coherent date with this > series on his 8040 based board. For the record, as the U-Boot on this > board didn't provide a "date reset" command for the RTC located on CP > slave, then Russell needed to do the following: > > devmem2 0xf428401c w 0 > devmem2 0xf4284018 w 0x2000
The question being what does that do and whether it could be done in the driver instead. -- Alexandre Belloni, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- You received this message because you are subscribed to "rtc-linux". Membership options at http://groups.google.com/group/rtc-linux . Please read http://groups.google.com/group/rtc-linux/web/checklist before submitting a driver. --- You received this message because you are subscribed to the Google Groups "rtc-linux" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
