Hi Eugeniyi,
first of all sorry for delay, my answers are in text below.
On 08/14/13 11:49 PM, Eugeniy Meshcheryakov wrote:
Hi,
14 серпня 2013 о 16:54 +0200 Karel Gardas написав(-ла):
What makes me more nervous about supporting older chips is addition:
rcc&= SYSCONRCC_MOSCDIS;
syscon->rcc = rcc;
Ugh, wait, you are clearing all bits but SYSCONRCC_MOSCDIS in RCC? That
could not be right. Did you mean to do
rcc&= ~SYSCONRCC_MOSCDIS;
??
No, I mean exactly what's there. What's the problem with disabling main
oscillator here? i.e. to disable main oscillator you need to set MOSCDIS.
^ w/o this my code is not running at all, i.e. it probably runs on
default 12 MHz. I'm curious how older chips worked without this.
The switching to PLL procedure for lm3s3749 does not mention MOSCDIS
bit. In fact, it is only mentioned in the register description, but not
anywhere else in the datasheet. I guess it should be safe to clear it,
but I cannot test this on the real hardware till next week.
it would be great if you test that since I would rather prefer not to
break your code on your board(s) :-)
BTW, LM4F120 spec adds following important note on page 219:
When transitioning the system clock configuration to use the MOSC as the
fundamental
clock source, the MOSCDIS bit must be set prior to reselecting the MOSC
or an undefined
system clock configuration can sporadically occur.
so I think that's what you are missing in LM3 spec.
Please let me know if the code runs for you.
Thanks a lot for your testing!
Karel
_______________________________________________
rtems-devel mailing list
rtems-devel@rtems.org
http://www.rtems.org/mailman/listinfo/rtems-devel
