Hi Clément, It seems likely that your geometry is not 180+fan-angle complete and therefore cannot lead to a proper reconstruction. From your attached geometry, you sweep from 0 to 178° (180-increment).
My suggestion would be to try some intermediate angles, so to recreate a complete ShortScan. I suggest you to try at least a 200/220 ° arc to check on your simulation pipeline. I hope this is helpful, Gabriele Da: Rtk-users <rtk-users-boun...@public.kitware.com> Per conto di Clément Mirabel Inviato: venerdì 11 dicembre 2020 09:11 A: rtk-users@public.kitware.com Oggetto: [Rtk-users] Trying to reconstruct with a 180 degrees circular projection geometry Hi, I have been trying to set the geometry in ThreeDCircularProjectionGeometry with values between 0 and 180 degrees, to reproduce the motion of some acquisition systems, but reconstruction is far from the expected result when the gantry angle does not reach max value of (360-increment). (Attached is the geometry file generated) My workflow is the following : * Apply JosephForwardProjectionImageFilter on a 3D Volume * Try to reconstruct using FDKConeBeamReconstructionFilter Although, the result from JosephForwardProjectionImageFilter describes a 180 degrees rotation, the output of the reconstruction seems to display rays from opposite direction but not from rotated directions Here is a view of what is supposed to be an axial slice: Thanks for your help! Clément
_______________________________________________ Rtk-users mailing list Rtk-users@public.kitware.com https://public.kitware.com/mailman/listinfo/rtk-users
