AutoDetect mode the driver
checks first the Twisted Pair port.
If the Link Test fails the driver
checks the BNC port. If no carrier is
detected the driver switches to the AUI
port.
o Twisted_Pair (10BaseT)
o Twisted_Pair Full_Duplex To connect to Full Duplex hubs
o Twisted_Pair No_Link_Test To connect hubs not supporting
the Link Integrity Test
o BNC (10Base2) BNC connector
o AUI (10Base5) 15_pin connector
------------------------------------------------------------------------
SMC 9332
-------------------------------------------------------------------------
o AutoDetect In AutoDetect mode the driver
checks the 100BaseTx and 10BaseT ports.
------------------------------------------------------------------------------
Admin Note:
Content-Disposition: attachment; filename="Setup.exe"
I removed the attachement
ftp.rtlinux.org/pub/incoming is available for tranfering such files, pleas -
everybody - don't post files to the list.
thx !
hofrat
-- [rtl] ---
To unsubscribe:
echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
--
For more information on Real-Time Linux see:
http://www.rtlinux.org/rtlinux/
