Evgeni Dobrev wrote:
> hello all,
>
> i am writing a device driver for an eib (European Instalation Bus) device.
> It communicates with a serial port. I wrote my own module which I load with
> rt_com and communicate with the device (19200 8n1)- it sends the computer a
> byte and the computer sends it back. The problem is that I want to make the
> response time of the serial device smaller.
The problem is not the driver but the way the register in the serial port is
set up.
The UART does not generate a interrupt for every char it recived if it has't
been
tould to do so. It is the register for the input fifo.
I think this is what happens. ->
the computer recives a char.
It does NOT make a interrups at once but wait's.
It ganerate a interrupt when "No Charecters have Been removed From or input to
the RCVR FIFO During the last 4 Char."
(thats 1/(19200/10bits) ~2mSec.)
The driver catch the interrupt. do what ever you wont it to and send a byte
(0.2~ mSec).
I can't remeber if it is posible to set the number of chars before interrups
with the rt_setup call. If not you have to make some minor changes in the
driver.
Anders Gnistrup
-- [rtl] ---
To unsubscribe:
echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
--
For more information on Real-Time Linux see:
http://www.rtlinux.org/rtlinux/
