> Second, I am running RTL very successfully on a 486, 66MHz, 32Mb but want to
> upgrade the hardware. The project involves reading some (APDs) photon counters
> at rates up to tens of kHz (if we can) and manipulating the incoming signals
> (which might be equally spaced in time and mighht not) to provide position
> demands for a (tip-tilt) mirror (at several kHz).
Phil,
Send me the detail about the counters and triggers.
I have successfull performed dual micro loop ISR's outside for RTL with
success to 33 microseconds (very useless) under SMP.
As not to flood the list, please do this on the side.
I still some do astronomy with 1P21 PMT's with cascaded pulses, blah blah...
I assume that we are talking two axis motion wobble plates/mirrors?
Andre Hedrick
The Linux IDE guy -- http://www.dyer.vanderbilt.edu/server/udma/
APC UPS Daemon Support Center.
http://www.brisse.dk/site/apcupsd/
Going FSF/GNU or GPL2 source soon.
--- [rtl] ---
To unsubscribe:
echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
----
For more information on Real-Time Linux see:
http://www.rtlinux.org/~rtlinux/
