Rick,
I had this exact problem with my machine. What happened was when the kernel
was rebuilt it put all of the modules in a directory called /lib/modules/2.0.36.RTL1.1
What you need to do is move the /lib/modules/2.0.36 to a new directory and either
move or copy the modules in /lib/modules/2.0.36.RTL1.1 to the /lib/modules/2.0.36
With the modules in the /lib/modules/2.0.36.RTL1.1 the kernel couldn't find them.
If you watch your system on bootup it should show some errors about being able
to find modules or ksyms don't match and list modules etc. Once I did this all was
was working fine.
> ----------
> From: Rick Welch[SMTP:[EMAIL PROTECTED]]
> Sent: Friday, May 21, 1999 6:38 AM
> To: Wei DING
> Cc: ML_rtl
> Subject: Re: [rtl] mount failure
>
> Hello,
> I think you'll need to rebuild your kernel with iso9660 filesystem
> support. When you do the "make config" or "make xconfig" there's an
> option under the filesystems area to compile in iso9660 support. Also
> check to make sure you compile in support for your cdrom.
> Good luck!
> -Rick
>
> > Hi all,
> >
> > I installed the Redhat 5.2. ,and it seemed to work no problems.
> > But after I tried to installed Real-Time Linux, I can not mount floppy disk
> > and cdrom.
> > Would you let me why it is?
> >
> > I got the following message.
> >
> > [root@localhost ding]# mount /dev/cdrom /mnt/cdrom
> > mount: fs type iso9660 not supported by kernel
> > [root@localhost ding]# mount
> > /dev/hda1 on / type ext2 (rw)
> > none on /proc type proc (rw)
> > /dev/hda5 on /home type ext2 (rw)
> > /dev/hda6 on /usr type ext2 (rw)
> > localhost:(pid403) on /net type nfs
> > (intr,rw,port=1023,timeo=8,retrans=110,indirect,map=/etc/amd.conf,dev=000000
> > 02)
> > automount(pid435) on /misc type autofs
> > (rw,fd=5,pgrp=435,minproto=2,maxproto=3)
> >
> > Thanks!
> >
> > ------
> > DING Wei [EMAIL PROTECTED]
> >
> > --- [rtl] ---
> > To unsubscribe:
> > echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
> > echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
> > ----
> > For more information on Real-Time Linux see:
> > http://www.rtlinux.org/~rtlinux/
>
>
> --- [rtl] ---
> To unsubscribe:
> echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
> echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
> ----
> For more information on Real-Time Linux see:
> http://www.rtlinux.org/~rtlinux/
>
--- [rtl] ---
To unsubscribe:
echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
----
For more information on Real-Time Linux see:
http://www.rtlinux.org/~rtlinux/
