I have seen SCSI used as a high speed path.  Of course,  Gigabit ethernet is now at the retail stores.

Some SCSI controllers used to have a fair amount of local cache.
 

Regards,
 

Mike

Christophe Kumsta wrote:

> > I want to connect a PCI bus network interface card to my notebook
> > computer.Who can tell me how to bridge a PCI bus to a PCMCIA bus?
>
Donald Gaffney wrote:
> Wow, these busses are *a lot* different (width, speed, and setup); I
> don't think there is a way to do this. I've never heard of a product to
> do this, it seems like there would be alot of caching necessary to move
> off of PCI on to PCMCIA (that is you couldn't possibly get the full
> bandwidth of the PCI bus, because the PCMCIA bus is slower).

I agree with Donald !!!

A such device is very complicated , cause on bootup , a bios ( PCI Bios)
is needed to configure PCI card ( IRQs , IOs ... ) and I don't think
that an emulation of this hard is possible thinking that PCMCIA is
already a
bus with his own configuration !

More , on Hardware , the PCI configuration space is located on PCI Bios,
directly accessible on Bios of the computer , and if a such device
exists , it is not sure that the PCI searching device of drivers work
(cause they search in a special Bios Area ) !

A PCMCIA NetCard would be cheaper with less complication.

-- KUMSTA Christophe
-- <[EMAIL PROTECTED]>
-- real-time system developper
-- RT-Linux (Use the source luke)
--- [rtl] ---
To unsubscribe:
echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
----
For more information on Real-Time Linux see:
http://www.rtlinux.org/~rtlinux/

-- 
  Alcatel USA              Internet: [EMAIL PROTECTED]
  1000 Coit Road Plano, Texas 75075
  **** The opinions expressed are not those of Alcatel USA, Inc ****
 
begin:vcard 
n:cravens;mike
tel;home:(972) 423-9463
tel;work:(972) 477-7077
x-mozilla-html:TRUE
adr:;;;;;;
version:2.1
email;internet:[EMAIL PROTECTED]
title:Senior Software Engineer
x-mozilla-cpt:;1688
fn:[EMAIL PROTECTED]
end:vcard


Reply via email to