Hello, It has been a few weeks since my last post... I have finished conversion and checkout of a simulator software model that is certified under the FAA Phase II specification (roughly equiv. to current FAA level C specs). This device is on a 6 DOF motion base with wrap-around 4 window visual system. The basic Flight, Engines, Nav, Autopilot, and Systems code are operational. Worst case cycle iteration is 4500usec and best case is 2500usec. A 30hz iteration rate specifies 33.3msec per cycle. Thus the simulator is using only 10% of the boxes capability (it is running on an old P166 with 16megs of memory). Worst case jitter under heavy disk activity is 30usec, with the average in the 10usec range. I am also experimenting with a dual P500 box. I have 2.2.12 patched with Beta16 operational, and am rewriting the sim executive towards POSIX compliance. I hope to have the same sim operational on this box soon. Does anyone know of reliable patche(s) to implement processor affinity on RTL? Thanks! Todd Gearheart FlightSafety Intl Simulator Systems Division --- [rtl] --- To unsubscribe: echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED] ---- For more information on Real-Time Linux see: http://www.rtlinux.org/~rtlinux/
