Hi, I have installed the V1.3 rtlinux over a Redhat 6.0 distribution. I used the special patch in : http://www.suse.de/~florian/ Now I'm trying to use rt_com to handled the serial line. I compiled rt_com correctly, but when I try to install the module I always get: rt_com: cannot request all port regions this is due to the fact, that when the modules calls request_region( p->port, 8, "rt_com" ); the system reply that the regions are in use. This can be seen in : /proc/ioports How can solve this problem ? In don't advise Linux that RTL will use this ports (I don't request the region) what would happen ? Best Regards, Ramon
begin:vcard n:Costa-Castelló;Ramon tel;fax:+34 93 401 66 05 tel;work:+34 93 401 6657 x-mozilla-html:FALSE url:http://www.ioc.upc.es/~costa org:Institut d'Organització i Control de Sistemes Industrials (IOC);Enginyeria de Sistemes, Automàtica i Informàtica Industrial (ESAII) version:2.1 email;internet:[EMAIL PROTECTED] adr;quoted-printable:;;Universitat Polit=E8cnica de Catalunya (UPC)=0D=0AEscola T=E9cnica Superior d'Enginyeria Industrial de Barcelona (ETSEIB)=0D=0AAv. Diagonal 647, 11 (Despatx 11-8);Barcelona;CATALUNYA;08028;SPAIN x-mozilla-cpt:;-1 fn:Ramon Costa-Castelló end:vcard
