I your first message, you said that you want a PC-to-PC communications
device. You can get close to your desired rate of 10 MB/sec with a 100
Mb/sec Ethernet.
I'm right now in the process of writing drivers for some products of the TEK
Micro company.
http://www.tekmicro.com
The devices I have are called "Fastlink" and are designed for very high
speed communications. I've got an input board (FPMC-LVI-2x28) and an output
board (FPMC-LVO-2x28) which they claim are capable of 132 MB/sec (the full
bandwidth of the PCI bus: 33 MHz x 32 bits/transfer).
They're very difficult devices to program but TEK probably has something
simpler for which they may even have sample driver-code.
Norman Dresner
Fellow Systems Engineer & (SGI) Advanced Signal Processing Laboratory
Administrator
Radar Systems Engineering Department
Electronic Systems and Sensors Segment
Northrop Grumman Corporation
Baltimore-Washington International Airport
7323 Aviation Boulevard
Baltimore Maryland 21240
Voice: (410) 993 - 2096 Mornings; all-day voice-mail
(410) 969 - 8068 Afternoons with answering machine
FAX: (410) 993 - 8084 On-site
(410) 969 - 8068 Afternoons; call first to arrange
E-Mail: Mornings: mailto:[EMAIL PROTECTED]
Afternoons: mailto:[EMAIL PROTECTED]
> -----Original Message-----
> From: Shigehiro Kamakura [SMTP:[EMAIL PROTECTED]]
> Sent: Tuesday, March 27, 2001 7:41 PM
> To: Dresner, Norman A.
> Cc: [EMAIL PROTECTED]
> Subject: RE: [rtl] RTLinux communication device
>
> Now, I use SCSI-2 target mode for Windows.
> But I must change OS to RTLinux.
> Because I sarched SCSI adapter for RTLinux support, don't found it.
> I want PCI device for data transfer rate 10MB/sec up.
>
> Thanks.
>
> -shigehiro
>
>
> >what do you mean by "High Speed"?
> >
> >1 MB/sec? 10 MB/sec? ...
> >
> > Norm
> >
> >> -----Original Message-----
> >> From: Shigehiro Kamakura [SMTP:[EMAIL PROTECTED]]
> >> Sent: Monday, March 26, 2001 11:58 PM
> >> To: [EMAIL PROTECTED]
> >> Subject: [rtl] RTLinux communication device
> >>
> >> Hi , all!!
> >>
> >> I want use PC to PC data communication PCI device for RTLinux.
> >> Does anyone know high speed PC to PC data communication PCI device
> >> support by RTLinux?
> >>
> >> Thanks.
> >>
> >> -shigehiro
> >>
> >>
> >> -- [rtl] ---
> >> To unsubscribe:
> >> echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
> >> echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
> >> --
> >> For more information on Real-Time Linux see:
> >> http://www.rtlinux.org/rtlinux/
> >-- [rtl] ---
> >To unsubscribe:
> >echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
> >echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
> >--
> >For more information on Real-Time Linux see:
> >http://www.rtlinux.org/rtlinux/
> >
> >
> -- [rtl] ---
> To unsubscribe:
> echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
> echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
> --
> For more information on Real-Time Linux see:
> http://www.rtlinux.org/rtlinux/
-- [rtl] ---
To unsubscribe:
echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
--
For more information on Real-Time Linux see:
http://www.rtlinux.org/rtlinux/
