I am currently using 7.3 with kernel 2.4.18 - it works great. In fact this is as stable and tame a combination Ive seen since RTL 1.1 and kernel 2.0.36 under RedHat 5.2.
-----Original Message----- From: Der Herr Hofrat [mailto:[EMAIL PROTECTED]] Sent: Wednesday, June 05, 2002 11:11 PM To: [EMAIL PROTECTED] Subject: Re: [rtl] distributions > hi all > > which linux distribution would you choose if you got to compile/use a kernel > from kernel.org (as you have to when using rtlinux) ? you might not have to - in fact I patched rtlinux-3.0/3.1 into the SuSE and RH patched kernels and it worked - but taking a clean kernel from kernel.org is the safe solution. > perhaps you might wonder about this silly question, but I ran into problems > with mandrake linux and the 2.4.4 kernel. Mandrake installed with > development tools etc etc, but the kernel compilation (make bzImage) just > fails. yacc: command not found.i your install is not complete then or your path settings are very strange, yacc should reside in /usr/bin and that better be in your path... > seems as only comiling their own kernel is > ok...later I found yacc on the net, but then it fails one line below... > > so which distribution do you prefer/recommend for rtlinux? SuSE 7.0/7.2/7.3/8.0 RH 7.0/7.2/ ( 7.3 was reported to be ok - never tried it ) Mandrake 8.2 should be no problem Slcakware 8.0 also works ok For a step-by-step install guide for SuSE 8.0 check out ftp://ftp.fsmlabs.at/pub/rtlinux/contrib/rt_install.txt , this is for installing 2.4.18 rtl3.1 based on ripoll's patch on UP. hofrat -- [rtl] --- To unsubscribe: echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED] -- For more information on Real-Time Linux see: http://www.rtlinux.org/ -- [rtl] --- To unsubscribe: echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED] -- For more information on Real-Time Linux see: http://www.rtlinux.org/
