> Hi! > > Similar problem, too. The compiling process of kernel 2.4.18 works fine on > my new Redhat 7.3 system. I've patched both RTLinux 3.1 and Linux 2.4.18 > with > the patch that you sent to the "gearheart" directory under the link. > After rebooting into RTLinux. The failure message of "ext3 file system is > not supported by the current system" still shows up. > > I have no problem seeing all files on the hard drive after reboot. However, > cannot load network card driver and sound card driver. When using command > "uname -r" to check kernel version. It shows 2.4.4-rtl. Is this correct?
looks like you booted the wrong kernel - 2.4.18 does support ext3 and should report 2.4.18-rtl. check your /etc/lilo.conf to see if you are loading the newly compiled kernel. > > How can I do to fix this "ext3 file system" problem to avoid the booting > failure message? > also check the RTLinux-RedHat-HOWTO at ftp://ftp.fsmlabs.at/pub/rtlinux/contrib/ hofrat p.s. if there are any HOWTOs out there for other distributions pleas let me know ! _______________________________________________ Rtl mailing list [EMAIL PROTECTED] http://www2.fsmlabs.com/mailman/listinfo.cgi/rtl
