Hi I managed to get the frag_ip example working .. accidently set the add_rtskbs = 2 while i was testing the cause of failure.
Bret On Sun, 23 May 2004, Bret Yen-Ting Lin wrote: > Hi > > I have found out that if I remote control the machine installed with RTAI. > All the RTAI testsuite will work fine. But if I do the testing directly to > those machines.. 99% of the chance it fails.. This is a weird behavior I > do not yet know why. I am however sure that all the failures begins when > start_rt_timer() is called and that rt_task_wait_period() will act nothing > but instant return fucntion > > > So I tried testing the frag_ip example remotely, which > rt_task_wait_period() work fine. i am however not receiving any message > back though..? > > insmod rtnet.o > insmod loopback-rt.o > rtifconfig rtlo up 127.0.0.1 > insmod frag_ip.o start_timer=1 > > ... > Sending message of 65505+2 bytes > ... > ..same... > > nothing received.. > > specific routing table > src dst dst_mask dst_mac > dev > 127.0.0.1 127.0.0.1 255.255.255.255 ff:ff:ff:ff:ff:ff > rtlo > > generic routing table > src dst dst_mask dst_mac > 127.0.0.1 127.0.0.1 255.255.255.255 00:00:00:00:00:00 > > (all this is done through ssh from a remote computer) > why is no messages received ? > > > My biggest problem still lies in how i can load eepro100-rt driver on > from a remote computer ? Any idea ? or is this just a stupid question? > > > Thanks > Bret > ------------------------------------------------------- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click _______________________________________________ RTnet-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/rtnet-users
