Hello Jan,
I'm now trying to setup a RT network using:
1. PIII/600MHz Laptop with rt_3c59x
2. MPC860L Module with rt_fec_enet
3. MPC5200 Module with rt_mpc52xx_fec
rtping is basicall working but "rtnet start" does not complete on the
target.
First, I wonder about a few error messages on 1. (see attachment). Do
they harm? At least I can not unload rtcfg with "rtnet stop".
Thanks.
Wolfgang.
Adeos: Domain RTAI registered.
RTAI: hal/x86 loaded.
Adeos: Domain IShield registered.
RTAI: fusion core v0.7.3 (Mind Storm) started.
RTDM Version 0.6.0
divert: freeing divert_blk for eth0
*** RTnet 0.8.3 - built on Jun 29 2005 17:00:29 ***
RTnet: initialising real-time networking
RTnet: stack-mgr started
RTDM: registered protocol device 2:2
RTDM: registered protocol device 17:2
cards: can only take 1 arguments
rt_3c59x: `1' invalid for parameter `cards'
3c59x for RTnet : Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:00.0: 3Com PCI 3CCFE575CT Tornado CardBus at 0x4000. Vers LK1.1.16
RTnet: registered rteth0
initializing loopback...
RTnet: registered rtlo
RTcfg: init real-time configuration distribution protocol
RTmac: init realtime media access control
RTmac/TDMA: init time division multiple access control mechanism
RTDM: registered named device TDMA0
divert: not allocating divert_blk for non-ethernet device vnic0
RTAI: RTAI: suspending kernel thread ce725380 ('ce725380') at 0xc013b117 after
exception #14
vnic0: no IPv6 routers present
RTnet: host 10.0.0.2 unreachable
RTnet: host 10.0.0.2 unreachable
divert: no divert_blk to free, vnic0 not ethernet
RTAI: RTAI: suspending kernel thread e0ac5c40 ('e0ac5c40') at 0xc013b117 after
exception #13
RTmac/TDMA: unloaded
RTmac: unloaded
Assertion failed!
/temp/rtai/trunk/rtnet/stack/rtcfg/rtcfg_frame.c:rtcfg_cleanup_frames:575
(&rtcfg_pool)->pool_balance == 0
pool: e0ac7f00
