Hello rtcfg problem Master and slave do not find each other!
Master sends RTmac broadcast packets, but slave does not respond. With Intel 8257/8/9 cards the system CRASHES !!!!! With Realtek 8139: see the following debug messages. ########################################################################## ON MASTER: [EMAIL PROTECTED] rtnet]# sbin/rtnet start *** RTnet 0.9.2 - built on Mar 15 2006 14:37:33 *** RTnet: initialising real-time networking eepro100-rt.c:1.36-RTnet-0.7 2002-2005 Jan Kiszka <[EMAIL PROTECTED]>eepro100-rt.c: based on eepro100.c 1.36 by D. Becker, A. V. Savochkin and othersrteth0: 0000:00:0b.0, 00:90:27:71:70:EA, IRQ 11.
RTnet: registered rteth0 initializing loopback... RTnet: registered rtlo RTcfg: init real-time configuration distribution protocol RTmac: init realtime media access control RTmac/TDMA: init time division multiple access control mechanismRTcfg: rtcfg_do_main_event() rtdev=1, event=RTCFG_CMD_SERVER, state=RTCFG_MAIN_OFF
RTcfg: next main state=RTCFG_MAIN_SERVER_RUNNINGRTcfg: rtcfg_do_main_event() rtdev=1, event=RTCFG_CMD_ADD, state=RTCFG_MAIN_SERVER_RUNNING RTcfg: rtcfg_do_main_event() rtdev=1, event=RTCFG_CMD_ADD, state=RTCFG_MAIN_SERVER_RUNNING RTcfg: rtcfg_do_main_event() rtdev=1, event=RTCFG_CMD_ADD, state=RTCFG_MAIN_SERVER_RUNNING Waiting for all slaves...RTcfg: rtcfg_do_main_event() rtdev=1, event=RTCFG_CMD_WAIT, state=RTCFG_MAIN_SERVER_RUNNING
RTcfg: error -105 while sending stage 1 frame RTcfg: error -105 while sending stage 1 frame RTcfg: error -105 while sending stage 1 frame RTcfg: error -105 while sending stage 1 frame
sbin/rtnet stop
hard_start_xmit returned -11 RTcfg: error -11 while sending stage 1 frame hard_start_xmit returned -11 RTcfg: error -11 while sending stage 1 frame hard_start_xmit returned -11 RTcfg: error -11 while sending stage 1 frame RTDM: INFO > IRQ: 11, INTRCNT: 4373 RTmac/TDMA: unloaded RTmac: unloaded RTcfg: error -100 while sending stage 1 frame RTcfg: error -100 while sending stage 1 frame RTcfg: error -100 while sending stage 1 frame RTcfg: error -100 while sending stage 1 frame RTcfg: error -100 while sending stage 1 frame RTcfg: error -100 while sending stage 1 frame RTcfg: unloaded removing loopback... RTnet: unregistered rtlo RTnet: unregistered rteth0 RTnet: unloaded [EMAIL PROTECTED] rtnet]# ####################################################################### ON SLAVE: ####################################################################### SLAVE: [EMAIL PROTECTED] rtnet]# sbin/rtnet start *** RTnet 0.9.2 - built on Mar 15 2006 16:22:20 *** RTnet: initialising real-time networking rt_8139too Fast Ethernet driver 0.9.24-rt0.4 ACPI: PCI Interrupt 0000:03:08.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 RTnet: registered rteth0 initializing loopback... RTnet: registered rtlo RTcap: real-time capturing interface RTcfg: init real-time configuration distribution protocol RTmac: init realtime media access control RTmac/TDMA: init time division multiple access control mechanism rteth0: rtl8139_set_rx_mode(0002) done -- Rx config 0000f78a. Stage 1: searching for master...RTcfg: rtcfg_do_main_event() rtdev=1, event=RTCFG_CMD_CLIENT, state=RTCFG_MAIN_OFF RTcfg: next main state=RTCFG_MAIN_CLIENT_0 ########################################################### see attached ethereal file for tdma, tdmac packets --------------------------------------------------------------------------------------------- Systemconfiguration: kernel: 2.6.15.4 (tried 2.6.9 also)kernel patch: rtai-3.3/base/arch/i386/patches/hal-linux-2.6.15-i386-1.2-00.patch
RTAI 3.3 RTnet 0.9.2 (svn) ------------------------------------------------------------------------------------------------- Any suggestion what to do? Jochen
rtnet_cap_tdma
Description: Binary data
