Hi all! I'm workig with this set: linux-2.4.18 RTAI 3.0 (rthal-5g-2.4.18.patch for PPC) RTNET 0.7.1
I'm getting a very strange behavior when I going to set up Rtnet: PPC host with IP: 10.10.1.1: [ with the network wire unplugged from switch] # lsmod loopback-rt 1412 1 mpc8xx_fec-rt 5398 1 rtnet 45856 0 [loopback-rt mpc8xx_fec-rt] rtai_rtdm 11424 0 [rtnet] rtai_sem 18544 0 [mpc8xx_fec-rt rtnet] rtai_up 44400 0 [mpc8xx_fec-rt rtnet rtai_rtdm rtai_sem] rtai_malloc 5224 0 [rtai_rtdm rtai_sem rtai_up] rtai_hal 22480 0 [loopback-rt mpc8xx_fec-rt rtnet rtai_rtdm rtai_sem rtai_up rtai_malloc # ./rtifconfig rtlo up 127.0.0.1 # ./rtifconfig rteth0 up 10.10.1.1 # ./rtroute solicit 10.10.1.2 dev rteth0 fec_enet_start_xmit: data len is 42 fec_enet_start_xmit: transmission start triggered fec_enet_interrupt: interrupt handler fec_enet_tx: TX path RTnet: TXI: c669f040 c6531330 0 fec_enet_tx: dev_kfree_rtskb, sk buffer freed! [These are my traces. Obiously the ARP cache is not correct because of we are not connected to switch] # ./rtroute Host Routing Table Hash Destination HW Address Device 00 0.0.0.0 00:00:00:00:00:00 rtlo 01 255.255.255.1 FF:FF:FF:FF:FF:FF rteth0 01 10.10.1.1 00:00:00:00:00:00 rtlo 01 127.0.0.1 00:00:00:00:00:00 rtlo [At this moment I connect the network wire to switch and try again] # ./rtroute solicit 10.10.1.2 dev rteth0 fec_enet_start_xmit: data len is 42 fec_enet_start_xmit: transmission start triggered [I repeat this command several times with the same behavior until I obtain the output queue full] # ./rtroute solicit 10.10.1.2 dev rteth0 fec_enet_start_xmit: data len is 42 fec_enet_start_xmit: transmission start triggered fec_enet_start_xmit: rtnetif_stop_queue! # ./rtroute solicit 10.10.1.2 dev rteth0 fec_enet_start_xmit: data len is 42 RTnet: rteth0: tx queue full!. hard_start_xmit returned 1 Please, anybody has an idea? Best regards. -- Javi Roman ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ RTnet-users mailing list RTnet-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/rtnet-users
