Hi, My situation is that I would like to connect a RTAI + rtnet box with a vxworks controller. I have a cross cable joining the two boxes and another ethernet in the rtai box to have a connexion to our non-rt normal network.
I'm new in this of rtnet and after compiled, configured an interface and running an example with success I have a problem trying to connect to the vxworks. Normally to try to check if a network works I usually make a ping. With rtnet I have my ethernet configured as 192.168.1.3 and the vxworks with 192.168.1.4. I can do a rtping to my card: ./rtping 192.168.1.3 Real-time PING 192.168.1.3 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 time=23.8 us 64 bytes from 127.0.0.1: icmp_seq=2 time=14.0 us ..... but when I do it to the other network I have: ./rtping 192.168.1.4 Real-time PING 192.168.1.4 56(84) bytes of data. ioctl: No route to host my rtroute says: ./rtroute Host Routing Table Hash Destination HW Address Device 01 127.0.0.1 00:00:00:00:00:00 rtlo 03 192.168.1.3 00:00:00:00:00:00 rtlo 3F 192.168.1.255 FF:FF:FF:FF:FF:FF rteth0 I'm sure that I'm doing something stupid but I'm really lost. Someone could light me in the dark path of the realtime and the network? ;-) Regards, Leo ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ RTnet-users mailing list RTnet-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/rtnet-users
