> > Hello !
> > 
> > I begin with RTNet and I have an install problem :
> > 
> > When I run "rtnet start" it returns :
> > rteh0: unknown interface : No such device
> > rteh0-mac: No such device
> > ioctl: No such device
> > ioctl: No such device
> > ioctl: No such device
> > ioctl: No such device
> > ioctl (add): No such device
> > vnic0: unknown interface: no such device
> > SIOCSIFADDR: No such device
> > vnic0: unknown interface: no such device
> > SIOCSIFNETMASK: No such device
> > SIOCGIFADDR: No such device
> > SIOCSIFBROADCAST: No such device
> > Wainting for all slaves...ioctl: No such device
> > ioctl: No such device
> > 
> > 
> > My configuration :
> > P4 1.7 ICH4 
> > Eth controller Intel coorp 82801DB PRO/100 VM (LOM) Eth 
> controller (rev 81)
> > 
> > Fedora Core 6, linux 2.6.20.4, xenomai 2.3.1, rtnet 0.9.9
> > 
> > Does this eth device is not supported by the rteepro100 driver ?
> 
> If unsure, check the pci id of your hardware against the list in the
> driver code.

How can I find the pci id of my hardware ?

> > Or did I wrong configure my eth interface ? Or other idea ?
> 
> Did you unload / modularised the original Linux driver (e100 or
> eepro100) in your kernel config first? It must not be 
> compiled into the
> kernel and it has to be removed before you can start the 
> RTnet NIC driver.

Thanks, I seems "rmmod e100" doesn't unload the module. But I don't know why.
I did :
ifconfig eth0 down
rmmod e100

And lsmod command returns :
Module          Size            Used    by
e100                    32776           0
...

Any idea ?
        

This e-mail is intended only for the above addressee. It may contain privileged 
information.
If you are not the addressee you must not copy, distribute, disclose or use any 
of the information in it. 
If you have received it in error please delete it and immediately notify the 
sender.
Security Notice: all e-mail, sent to or from this address, may be accessed by 
someone other than the recipient, for system management and security reasons. 
This access is controlled under Regulation of security reasons.
This access is controlled under Regulation of Investigatory Powers Act 2000, 
Lawful Business Practises.



-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
RTnet-users mailing list
RTnet-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/rtnet-users

Reply via email to