Hello rtnet users :) I'm using two machines here, one acts as a master, other one acts as a slave. The slave isn't able to synchronize with master when configuring a cycle length around 10 down to 2 ms (and most probably any cycle length lower then that). When choosing 1 second cycle length, it syncs fine.
Capturing the whole story with wireshark shows, that slave in short cycle configurations requests reply calibration frame e.g. in cycle 1500, although it sends request calibration frame in cycle 1700, so of course this can't work. As it works in 1 s cycle configuration, only reason for this behavoir I can imagine is, that slave isn't able to calculate and send request calibration frame early enough. But this isn't really possible, because we're talking about a >2GHz machine (x86). Any ideas? Any fixes? Thanks in advance Karl -- von Karl Reichert GMX FreeMail: 1 GB Postfach, 5 E-Mail-Adressen, 10 Free SMS. Alle Infos und kostenlose Anmeldung: http://www.gmx.net/de/go/freemail ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ RTnet-users mailing list RTnet-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/rtnet-users
