Hi Dietrich,

Did you try the hints given in xenomai FAQ?

Maybe you should post this to xenomai mailing list too, this is a xenomai issue.

Karl

> Hi all,
> 
> I use a VME board GE-Fanuc 7807 which has 2 Interl PRO/1000 NIC.
> I can load the rt_e1000.ko module but as soon as I start the first NIC
> (ETH0) 
> with "/usr/local/rtnet/sbin/rtifconfig rteth0 up 192.168.1.90" the system 
> crashes (it reboots).
> No problem when starting the second NIC (ETH1)
> 
> so I made some investigation and I saw that the first NIC shares the IRQ
> 11 
> with two devices:
> 00:02.0 VGA and 
> 00:1d.0 USB Controller
> 
> here is part of dmesg when the driver is loaded:
> 
> ***************************************************************************************
> Intel(R) PRO/1000 Network Driver - version 7.1.9
> Copyright (c) 1999-2006 Intel Corporation.
> PCI: Found IRQ 11 for device 0000:02:05.0
> --> PCI: Sharing IRQ 11 with 0000:00:02.0
> --> PCI: Sharing IRQ 11 with 0000:00:1d.0
> e1000: 0000:02:05.0: e1000_probe: (PCI:33MHz:64-bit) 00:20:38:01:bd:aa
> RTnet: registered rteth0
> e1000: rteth0: e1000_probe: Intel(R) PRO/1000 Network Connection
> PCI: setting IRQ 10 as level-triggered
> PCI: Found IRQ 10 for device 0000:02:05.1
> --> PCI: Sharing IRQ 10 with 0000:00:1f.3
> e1000: 0000:02:05.1: e1000_probe: (PCI:33MHz:64-bit) 00:20:38:01:bd:ab
> RTnet: registered rteth1
> e1000: rteth1: e1000_probe: Intel(R) PRO/1000 Network Connection
> ********************************************************************************
> 
> and here the lspci output
> *********************************************************************************
> 00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor
> to 
> I/O Controller (rev 02)
> 00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV 
> Processor to I/O Controller (rev 02)
> 00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV 
> Processor to I/O Controller (rev 02)
> 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM
> Integrated 
> Graphics Device (rev 02)
> 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated
> Graphics 
> Device (rev 02)
> 00:1c.0 PCI bridge: Intel Corporation 6300ESB 64-bit PCI-X Bridge (rev 02)
> 00:1d.0 USB Controller: Intel Corporation 6300ESB USB Universal Host 
> Controller (rev 02)
> 00:1d.1 USB Controller: Intel Corporation 6300ESB USB Universal Host 
> Controller (rev 02)
> 00:1d.4 System peripheral: Intel Corporation 6300ESB Watchdog Timer (rev
> 02)
> 00:1d.5 PIC: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt
> Controller (rev 02)
> 00:1d.7 USB Controller: Intel Corporation 6300ESB USB2 Enhanced Host 
> Controller (rev 02)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 0a)
> 00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller
> (rev 
> 02)
> 00:1f.1 IDE interface: Intel Corporation 6300ESB PATA Storage Controller
> (rev 
> 02)
> 00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02)
> 01:05.0 Class ff00: VMIC Unknown device 0004 (rev 01)
> 01:0c.0 Ethernet controller: Intel Corporation 8255xER/82551IT Fast
> Ethernet 
> Controller (rev 10)
> 01:0d.0 Bridge: Tundra Semiconductor Corp. CA91C042 [Universe] (rev 02)
> 02:05.0 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet 
> Controller (Copper) (rev 01)
> 02:05.1 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet 
> Controller (Copper) (rev 01)
> 02:0e.0 Network controller: PLX Technology, Inc. PCI <-> IOBus Bridge (rev
> 01)
> *********************************************************************************
> 
> 
> Then I tried to disable the USB in the BIOS and I was able to use both
> NICs. 
> So for now it is a good solution, but maybe in the future I will also need
> to 
> use USB. Can someone tell me something about this problem
> Thanks in advanced
> 
> here is the dmesg when USB is disabled Note that the first NIC in this
> case 
> shared the interrupt just with
> 00:02.0 VGA
> 
> *******************************************************************
> Intel(R) PRO/1000 Network Driver - version 7.1.9
> Copyright (c) 1999-2006 Intel Corporation.
> PCI: Found IRQ 11 for device 0000:02:05.0
> --> PCI: Sharing IRQ 11 with 0000:00:02.0
> e1000: 0000:02:05.0: e1000_probe: (PCI:33MHz:64-bit) 00:20:38:01:bd:aa
> RTnet: registered rteth0
> e1000: rteth0: e1000_probe: Intel(R) PRO/1000 Network Connection
> PCI: setting IRQ 10 as level-triggered
> PCI: Found IRQ 10 for device 0000:02:05.1
> --> PCI: Sharing IRQ 10 with 0000:00:1f.3
> e1000: 0000:02:05.1: e1000_probe: (PCI:33MHz:64-bit) 00:20:38:01:bd:ab
> RTnet: registered rteth1
> e1000: rteth1: e1000_probe: Intel(R) PRO/1000 Network Connection
> ******************************************************************
> 
> output of lspci without USB
> ***********************************************************************************
> 00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor
> to 
> I/O Controller (rev 02)
> 00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV 
> Processor to I/O Controller (rev 02)
> 00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV 
> Processor to I/O Controller (rev 02)
> 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM
> Integrated 
> Graphics Device (rev 02)
> 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated
> Graphics 
> Device (rev 02)
> 00:1c.0 PCI bridge: Intel Corporation 6300ESB 64-bit PCI-X Bridge (rev 02)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 0a)
> 00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller
> (rev 
> 02)
> 00:1f.1 IDE interface: Intel Corporation 6300ESB PATA Storage Controller
> (rev 
> 02)
> 00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02)
> 01:05.0 Class ff00: VMIC Unknown device 0004 (rev 01)
> 01:0c.0 Ethernet controller: Intel Corporation 8255xER/82551IT Fast
> Ethernet 
> Controller (rev 10)
> 01:0d.0 Bridge: Tundra Semiconductor Corp. CA91C042 [Universe] (rev 02)
> 02:05.0 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet 
> Controller (Copper) (rev 01)
> 02:05.1 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet 
> Controller (Copper) (rev 01)
> 02:0e.0 Network controller: PLX Technology, Inc. PCI <-> IOBus Bridge (rev
> 01)
> *******************************************************************************
> 
> 
> Some other useful information:
> uname -a
> Linux ACU 2.6.22 #6 SMP Tue Feb 12 19:14:37 UTC 2008 i686 GNU/Linux
> 
> 
> rtnet svn info
> Path: .
> URL: https://rtnet.svn.sourceforge.net/svnroot/rtnet/trunk/rtnet
> Repository Root: https://rtnet.svn.sourceforge.net/svnroot/rtnet
> Repository UUID: be94bdbd-1fe7-0310-aeeb-c95d3c307607
> Revision: 1146
> Node Kind: directory
> Schedule: normal
> Last Changed Author: kiszka
> Last Changed Rev: 1146
> Last Changed Date: 2007-12-27 18:49:59 +0100 (Thu, 27 Dec 2007)
-- 
von Karl Reichert

GMX startet ShortView.de. Hier findest Du Leute mit Deinen Interessen!
Jetzt dabei sein: http://www.shortview.de/[EMAIL PROTECTED]

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
RTnet-users mailing list
RTnet-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/rtnet-users

Reply via email to