LEBRETON, Julien wrote:
Hello Jan, thank you for your answer..

I have inserted rt_loopback module. That's ok. After that, on my windows box, I can ping : 151.157.3.3 (which is my default gateway) 151.157.3.4 152.157.1.1 152.157.1.2 But there is a problem.. In fact, when I ping 152.157.1.2, my board responds but not the destination host.. ping request are never sent to the destination box.. So how can I do for forwarding packets to the destination box?

How did you check that there is no packet leaving rteth2? Does RTnet report something to the kernel console?

Have you got any idea about my problem? My configuration is the following : # rtroute
Host Routing Table
Hash    Destination     HW Address              Device
00      0.0.0.0         00:00:00:00:00:00       rtlo
00      151.157.1.128   00:0F:B5:42:73:4A       rteth0  =====> input interface 1
01      127.0.0.1       00:00:00:00:00:00       rtlo
01      152.157.1.1     00:00:00:00:00:00       rtlo
02 152.157.1.2 00:30:64:02:DC:1A rteth2 ====> output interface

That looks OK (if rteth2 is interface 4 in the figure below).

03      151.157.3.3     00:00:00:00:00:00       rtlo
04      151.157.3.4     00:00:00:00:00:00       rtlo
3F      152.157.255.255 FF:FF:FF:FF:FF:FF       rteth2
3F      151.157.255.255 FF:FF:FF:FF:FF:FF       rteth1 ======> input interface 2

Network Routing Table
Hash    Destination     Mask                    Gateway
*       151.157.0.0     255.255.0.0             151.157.1.128
*       152.157.0.0     255.255.0.0             152.157.1.2



# rtifconfig
rteth0    Medium: Ethernet  Hardware address: 00:14:6C:8C:33:FA
          IP address: 151.157.3.3  Broadcast address: 151.157.255.255
          UP BROADCAST RUNNING  MTU: 1500

rteth1    Medium: Ethernet  Hardware address: 00:14:6C:8C:36:D0
          IP address: 151.157.3.4  Broadcast address: 151.157.255.255
          UP BROADCAST RUNNING  MTU: 1500

rteth2    Medium: Ethernet  Hardware address: 00:E0:0C:00:00:FD
          IP address: 152.157.1.1  Broadcast address: 152.157.255.255
          UP BROADCAST RUNNING  MTU: 1500

rtlo      Medium: Local Loopback
          IP address: 127.0.0.1
          UP LOOPBACK RUNNING  MTU: 1500

Here is the diagram of the test :
                                 _ _ _ _                   _ _ _ _ _
                                |       |                 |             |
                                |         | =======> 1|MPC 8560 |
Windows box ===> |hub | =======> 2| ADS |4 ======> Destination host (non-rt) | | |(rtnet) | |_ _ _ _| |_ _ _ _ _|

Sorry, no idea right now except that you should try to answer my questions above, maybe they will point you to the reason.

Jan

Attachment: signature.asc
Description: OpenPGP digital signature

-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
Don't miss this year's exciting event. There's still time to save $100. 
Use priority code J8TL2D2. 
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
RTnet-users mailing list
RTnet-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/rtnet-users

Reply via email to