Hello,
I am using Rtnet 0.9.10 with Xenomai-2.4.7. I used the frag-ip.c to send udp
packets to network. I measured the time distance
between the packets by using wireshark. The cycle is set to 2ms. Packet size
25 byte. (The printf in frag-ip.c was removed)
The following network measurement shows that in most cases the time is
really 2ms. But in some cases 1.8ms or 2.1 ms.
Is this normal? And could I improve this?
Time difference to previous packet in seconds:
0.002001 0.002002 0.002132 0.001861 0.002000 0.002000 0.002001 0.001999
0.002001 0.001999 0.002001 0.001999 0.002000 0.002002 0.001999 0.001999
0.002001 0.001999 0.002001
Thanks and regards,
Jens
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
RTnet-users mailing list
RTnet-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/rtnet-users
