Just a follow up: So, finally I did get the RTL8139 network interface card. Configured Xenomai very carefully, and got RTnet up and running on a Pentium 4 x86 machine. Now finally I can see the message "Waiting for slaves..." when I run ./rtnet start.
Thanks for your patience. Finally I can start up some programming things now. :phew: -Anisha On 08/06/2012, Anisha Kaul <born.rebel...@gmail.com> wrote: > On 8 June 2012 17:47, Jan Kiszka <jan.kis...@siemens.com> wrote: >> In short: the rt_r8169 does not support your hardware. It likely lacks >> some code that latest Linux versions of that driver contain. >> >> Someone has to identify the differences and port them into the RTnet >> version. If you are not familiar with driver development and no one else >> steps up, you will have to use a different hardware, one that is support >> by RTnet (e.g. some e1000e-supported Intel NIC). > > That's pretty much clear. thanks for bothering. > Anyway since this is an experimental driver, we wouldn't want to use > it for a long time purpose, we will have to get some another hardware > eventually which supports `r8139too` (if we plan to use RTnet). > > Thanks for being helpful. > > -- > Anisha Kaul > -- Anisha Kaul ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ RTnet-users mailing list RTnet-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/rtnet-users
