Hi,

I am having a problem with compilation.
I used instructions in the page 
http://www.xenomai.org/index.php/RTnet:Installation_%26_Testing


Here are versions I use:


RTNet:          0.9.13
Xenomai:                2.6.3
Linux kernel:   3.8.13

In config, I selected only Realtek 8169 (Gigabit) driver, which corresponds to 
my network card. 

I get the following errors:


/usr/src/rtnet/drivers/rt_r8169.c:218:47: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ 
or ‘__attribute__’ before ‘__devinitdata’
 static struct pci_device_id rtl8169_pci_tbl[] __devinitdata = {
                                               ^
/usr/src/rtnet/drivers/rt_r8169.c:656:22: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ 
or ‘__attribute__’ before ‘rtl8169_init_board’
 static int __devinit rtl8169_init_board ( struct pci_dev *pdev, struct 
rtnet_device **dev_out, unsigned long *ioaddr_out)
                      ^
/usr/src/rtnet/drivers/rt_r8169.c:821:22: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ 
or ‘__attribute__’ before ‘rtl8169_init_one’
 static int __devinit rtl8169_init_one (struct pci_dev *pdev, const struct 
pci_device_id *ent)
                      ^
/usr/src/rtnet/drivers/rt_r8169.c:1066:23: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ 
or ‘__attribute__’ before ‘rtl8169_remove_one’
 static void __devexit rtl8169_remove_one (struct pci_dev *pdev)
                       ^
/usr/src/rtnet/drivers/rt_r8169.c:2071:12: error: ‘rtl8169_pci_tbl’ undeclared 
here (not in a function)
  id_table: rtl8169_pci_tbl,
            ^
/usr/src/rtnet/drivers/rt_r8169.c:2072:10: error: ‘rtl8169_init_one’ undeclared 
here (not in a function)
  probe:  rtl8169_init_one,
          ^
/usr/src/rtnet/drivers/rt_r8169.c:2073:11: error: ‘rtl8169_remove_one’ 
undeclared here (not in a function)
  remove:  rtl8169_remove_one,


Regards,
Mari




------------------------------------------------------------------------------
Is your legacy SCM system holding you back? Join Perforce May 7 to find out:
• 3 signs your SCM is hindering your productivity
• Requirements for releasing software faster
• Expert tips and advice for migrating your SCM now
http://p.sf.net/sfu/perforce
_______________________________________________
RTnet-users mailing list
RTnet-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/rtnet-users

Reply via email to