You'd need to use some regex. There's a few ways to do this, but here's
how I would probably do it (assuming your hash was in the "hash" local
variable):
hash.map do |k,v|
if k =~ /\A((VTP-MIB::vtpVlanIndexVlanID)|(IF-MIB::ifName))\.\d+\Z/
[$1, v]
else
[k, v]
end
end.to_h
Unpacking this, here's what we are doing:
1. Calling #map on the hash, which iterates over each key-value pair in
the hash, yielding each key and value to the block that's given to it. The
return value of each block is added to the Array that it returns, which
means that the returned array is exactly the size of the hash.
2. We're using the =~ comparison operator to see if the value matches
the given regex.
3. The regex that we are using is:
/\A((VTP-MIB::vtpVlanIndexVlanID)|(IF-MIB::ifName))\.\d+\Z/. Unpacking
that, we've got:
\A - Matches the beginning of the string
((VTP-MIB::vtpVlanIndexVlanID)|(IF-MIB::ifName)) - This is a capture
group comprised of two other capture groups (one for each of the keys that
contain the numbers you are trying to remove. It says "match
VTP-MIB::vtpVlanIndexVlanID OR IF-MIB::ifName".
\. - Match a period
\d+ - Match 1 or more digits
\Z - Match the end of the string
Put all together, we are saying "match a string that starts with
VTP-MIB::vtpVlanIndexVlanID OR IF-MIB::ifName (and capture that part of the
string) followed by a period followed by any number of digits and nothing
else." The portion that we capture will come into play shortly.
4. If we match, we return an Array, [$1, v]. In Ruby, after a regex
match, the capture groups are stored in special variables. $1 represents
the first capture group (which is the portion of the hash keys that we want
to keep). For the key "VTP-MIB::vtpVlanIndexVlanID.3002", $1 will contain
"VTP-MIB::vtpVlanIndexVlanID". Given the above hash, when our block was
called for "VTP-MIB::vtpVlanIndexVlanID.3002" => "3002", we'd return
["VTP-MIB::vtpVlanIndexVlanID", "3002"]
5. If we don't match that regex, we return [k, v], which is just the
original key and value. Given the above hash, when our block was called
for "DISMAN-EXPRESSION-MIB::sysUpTimeInstance" => "206 days, 21:34:07.64",
we'd return ["DISMAN-EXPRESSION-MIB::sysUpTimeInstance", "206 days,
21:34:07.64"]
6. When we finish iterating over the hash, #map will return an array
containing each value that the block returned. This will be an Array of
Arrays, since our block only returns Arrays. The inner Arrays will contain
either our modified key or the original key, and always the original value.
Given a shortened version of the hash that you described above,
{
"SNMPv2-MIB::snmpTrapOID.0" => "BRIDGE-MIB::topologyChange",
"DISMAN-EXPRESSION-MIB::sysUpTimeInstance" => "206 days, 21:34:07.64",
"VTP-MIB::vtpVlanIndexVlanID.3002" => "3002"
}
Our call to #map would return:
[
["SNMPv2-MIB::snmpTrapOID.0", "BRIDGE-MIB::topologyChange"],
["DISMAN-EXPRESSION-MIB::sysUpTimeInstance", "206 days, 21:34:07.64"],
["VTP-MIB::vtpVlanIndexVlanID", "3002"]
]
Notice how the first two keys are unchanged (they passed through the
else branch in our conditional, but the last key,
"VTP-MIB::vtpVlanIndexVlanID" is modified, and the ".3002" has been
removed. That passed through the first half of our conditional because it
matched our regex.
7. Our final step is to convert that Array of Arrays back into a Hash.
We do this with by calling #to_h
<http://ruby-doc.org/core-2.4.0/Array.html#method-i-to_h> on the Array,
which will interpret the Array as an Array containing other Arrays of
key-value pairs and return a Hash.
There's a lot going on in those few lines of code, so I did my best to
break it down. Hope this helps.
Jim
On Sunday, January 15, 2017 at 3:21:39 AM UTC-5, Musa Aydın wrote:
>
> Hi,
>
> i am very beginner using ruby.
>
> i use a application that its name is logstash. it is ruby based monitoring
> tool.
>
> it is let use ruby code in its configuration file.
>
> i use this application for snmptrap messages.
> these messages contain some key = value sections.
>
> example output raw data:
>
> raw datası:
>
> {"event"=>{"SNMPv2-MIB::snmpTrapOID.0"=>"BRIDGE-MIB::topologyChange",
>> "DISMAN-EXPRESSION-MIB::sysUpTimeInstance"=>"206 days, 21:34:07.64",
>> "VTP-MIB::vtpVlanIndexVlanID.3002"=>"3002",
>> "@timestamp"=>2017-01-13T07:49:56.579Z, "host"=>"172.26.44.65",
>> "@version"=>"1", "message"=>"#<SNMP::SNMPv2_Trap:0x42394ae7
>> @request_id=110, @error_index=0, @error_status=0,
>> @source_ip=\"172.26.44.65\", @varbind_list=[#<SNMP::VarBind:0x30440dc
>> @name=[1.3.6.1.2.1.1.3.0], @value=#<SNMP::TimeTicks:0x3aab3b59
>> @value=1787604764>>, #<SNMP::VarBind:0x324d2099
>> @name=[1.3.6.1.6.3.1.1.4.1.0], @value=[1.3.6.1.2.1.17.0.2]>,
>> #<SNMP::VarBind:0x420805ae @name=[1.3.6.1.4.1.9.9.46.1.3.1.1.1.1.3002],
>> @value=#<SNMP::Integer:0x632bbf93 @value=3002>>, #<SNMP::VarBind:0x39215c
>> @name=[1.3.6.1.2.1.31.1.1.1.1.10027], @value=\"Fa0/27\">]>",
>> "IF-MIB::ifName.10027"=>"Fa0/27", "tags"=>[]}}
>
>
>
> more readable version.
>
> {
>> "SNMPv2-MIB::snmpTrapOID.0" =>
>> "BRIDGE-MIB::topologyChange",
>> "DISMAN-EXPRESSION-MIB::sysUpTimeInstance" => "206 days, 21:34:07.64",
>> "VTP-MIB::vtpVlanIndexVlanID.3002" => "3002",
>> "@timestamp" =>
>> 2017-01-13T07:49:56.579Z,
>> "host" => "172.26.44.65",
>> "@version" => "1",
>> "message" =>
>> "#<SNMP::SNMPv2_Trap:0x42394ae7 @request_id=110, @error_index=0,
>> @error_status=0, @source_ip=\"172.26.44.65\",
>> @varbind_list=[#<SNMP::VarBind:0x30440dc @name=[1.3.6.1.2.1.1.3.0],
>> @value=#<SNMP::TimeTicks:0x3aab3b59 @value=1787604764>>,
>> #<SNMP::VarBind:0x324d2099 @name=[1.3.6.1.6.3.1.1.4.1.0],
>> @value=[1.3.6.1.2.1.17.0.2]>, #<SNMP::VarBind:0x420805ae
>> @name=[1.3.6.1.4.1.9.9.46.1.3.1.1.1.1.3002],
>> @value=#<SNMP::Integer:0x632bbf93 @value=3002>>, #<SNMP::VarBind:0x39215c
>> @name=[1.3.6.1.2.1.31.1.1.1.1.10027], @value=\"Fa0/27\">]>",
>> "IF-MIB::ifName.10027" => "Fa0/27",
>> "tags" => [
>> [0] "_rubyexception"
>> ]
>> }
>
>
>
> There is a problem these keys
>
> "VTP-MIB::vtpVlanIndexVlanID.3002" and "IF-MIB::ifName.10027". this field
> contains digit section and this section is dynamic.
>
> i want to remove this section on key.
>
> it looks like "VTP-MIB::vtpVlanIndexVlanID" and "IF-MIB::ifName".
>
> how can i do this modification?
>
> i am not good at with ruby. i will push your patient :)
>
> thank you :)
>
>
>
--
You received this message because you are subscribed to the Google Groups "Ruby
on Rails: Talk" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/rubyonrails-talk/a98b7a70-c978-45c4-abfe-c72a9f299b8b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
