Great news!
Is this specific to the use of "from" whereas another rule like:-
rule "avoid expense"
when
ControlFact( phase == "do expensive call" )
AnotherFact( someExpensiveTimeConstantFunctionCall == someValue )
then
// Do something
end
Could not have the LHS not evaluated or (to avoid a double negative), would
always have the LHS fully evaluated ;-)_____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Edson Tirelli Sent: 06 February 2008 12:29 To: Rules Users List Subject: Re: [rules-users] Grouping rules Yes, it is possible to prevent the evaluation of part of the LHS patterns by the use of previous constraints and/or the introduction of control facts. For instance: rule "avoid expense" when ControlFact( phase == "do expensive call" ) AnotherFact( ) from someExpensiveServiceCall then // Do something end In the above example, the "someExpensiveServiceCall" will only be executed when the previous patterns are matched, i.e., when phase attribute of the ControlFact has the value "do expensive call". []s Edson 2008/2/6, Anstis, Michael (M.) <[EMAIL PROTECTED]>: I'm not sure as LHS's are evaluated when facts are inserted not when fireAllRules (or execute) is called. You can prevent the RHS from activating by using (for lack of a better name) "flag facts" (but this doesn't solve your problem); for example:- rule "avoid expense" when not exists Flag() AnotherFact( ) from someExpensiveServiceCall then // Do something end Don't forget though that if you share LHS patterns across multiple rules they will share the same nodes in the RETE network, so although you might be aware that the expensive calls are not required for some rules they might be required for other rules and hence you'll need to perform the expensive call when the facts are inserted in order for the other rules to activate. Perhaps if you better describe your use-case there might be a better solution. With kind regards, Mike _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jai Vasanth Sent: 05 February 2008 19:35 To: Rules Users List Subject: Re: [rules-users] Grouping rules I had another question on these lines. Is there a way to preven even the LHS from evaluating for certain cases ? A few of my LHS computation involve some expensive service calls and I would like to avoid unless and until it is asolutely necessary. Thanks Jai On Feb 1, 2008 8:35 AM, Jai Vasanth <[EMAIL PROTECTED]> wrote: Thanks. That helped. On Feb 1, 2008 7:31 AM, Anstis, Michael (M.) <[EMAIL PROTECTED]> wrote: Excuse me if you already understand but there is a difference between rule patterns being evaluated and their consequence running. Rules LHS are evaluated when objects are inserted into working memory whereas the consequence fires when you call fireAllRules(); The rules whose activations are executed are those in the given Agenda Group; thereafter those not in any agenda group execute. So if all rules are in an Agenda Group you should be OK. Of course they don't prevent all rule patterns from being checked as objects are inserted into WM (which has a performance impact) but this is what the RETE network was designed to optimise. You could try another configuration (but I think Agenda Groups are probably the preference by design). This gives complete isolation - but I haven't tried it so it might not even be possible ;-) global WorkingMemory wm; global RuleBase rbX; global RuleBase rbY; rule "Group X" when Fact( attribute == "condition1" ) then wm = rbX.newStatefulSession(); wm.fireAllRules(); end rule "Group Y" when Fact( attribute == "condition2" ) then wm = rbY.newStatefulSession(); wm.fireAllRules(); end Good luck. Mike _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jai Vasanth Sent: 01 February 2008 15:07 To: Rules Users List Subject: Re: [rules-users] Grouping rules Thanks for responding Yes, I did consider agenda groups, but I thought agenda groups only ordered execution in a particular fashion, so if Rule "pick group X" fires then it would make sure that rules in Agenda Group X fire first before the remaining but the remaining would fire eventually. Is my understanding correct ? I am looking for a solution for completely isolating a rule set conditioned on an object attribute. On Feb 1, 2008 12:46 AM, Anstis, Michael (M.) <[EMAIL PROTECTED]> wrote: What about Agenda Groups? Rule "pick group X" when Fact( attribute = "condition1" ) then drools.setFocus("Group X") end Rule "pick group Y" when Fact( attribute = "condition2" ) then drools.setFocus("Group Y") end Rule "Group X1" Agenda Group "Group X" when Smurf( ) then // Do something end Rule "Group X2" Agenda Group "Group X" when Smurfette( ) then // Something else end etc _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jai Vasanth Sent: 31 January 2008 19:45 To: [email protected] Subject: [rules-users] Grouping rules Hi, I am building a system where I would need to fire different sets of rules based on some attribute in the fact object. Here are someways which I thought of, I was wondering if there was something better than that. 1) I could do this by creating different sessions based on the data attrbute (different sessions would have different rule packages based on the attribute) or 2) Have all the rules fire (all the different sets of rules) irrespective of the attribute and have them insert fact new objects into the working memory. In the second round of rules, collect the (newly made) fact objects based on the attribute and take that action. Thanks Jai _______________________________________________ rules-users mailing list [email protected] https://lists.jboss.org/mailman/listinfo/rules-users _______________________________________________ rules-users mailing list [email protected] https://lists.jboss.org/mailman/listinfo/rules-users _______________________________________________ rules-users mailing list [email protected] https://lists.jboss.org/mailman/listinfo/rules-users -- Edson Tirelli JBoss Drools Core Development Office: +55 11 3529-6000 Mobile: +55 11 9287-5646 JBoss, a division of Red Hat @ www.jboss.com
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ rules-users mailing list [email protected] https://lists.jboss.org/mailman/listinfo/rules-users
