Ciao, not really sure where is your problem exactly, but as I use often
similar use-case of yours, thought worthy to share what I usually find
useful:
1. check STREAM mode is activated
2. check in the .drl is clearly defined what is a Fact, and what is an
Event. In your case I would check TemperatureRead is declared as Event?
3. activate Audit log / runtime logger.
I find especially useful point #3 because you will see, as the session
clock advances, what is still in working memory and when rule is activated
you will see against which Event/Facts.
Hope this is helpful
Ciao
MM
On Fri, Dec 6, 2013 at 11:54 PM, martinzp <marti...@gmail.com> wrote:
> Hi, i am new in the forum, and a beginner user of Drools so forgive me if
> my
> question isn't quite good.
>
> I want to test the "over window:time" operand.
>
> In order to do that i use the pseudo clock, but i have noticed that it
> doesn't behave as i would expect.
>
> The behaviour i think i observed, is that the rule is using the real clock
> instead of the pseudo clock.
>
> *Here is my drl file:*
>
> rule "Fire Detected"
> when
> c : Number(intValue >= 3) from accumulate (
> $tr : TemperatureRead(read > 40)
> over window:time ( 1s )
> from entry-point entryone ,
> count ($tr)
> )
> then
> System.out.println("Fire Detected!");
> end
>
>
>
> *and here is the portion of my main file that inserts the events:*
>
> TemperatureRead temp1 = new TemperatureRead(33.2);
> TemperatureRead temp2 = new TemperatureRead(38.7);
> TemperatureRead temp3 = new TemperatureRead(39.5);
> TemperatureRead temp4 = new TemperatureRead(42.5);
> TemperatureRead temp5 = new TemperatureRead(43.1);
> TemperatureRead temp6 = new TemperatureRead(47.8);
>
> SessionPseudoClock clock = ksession.getSessionClock();
>
> entryPoint1.insert(temp1);
>
> clock.advanceTime((new Date()).getTime(), TimeUnit.MILLISECONDS);
>
> fireRules();
>
> entryPoint1.insert(temp2);
>
> clock.advanceTime(1, TimeUnit.SECONDS);
>
> fireRules();
>
> entryPoint1.insert(temp3);
>
> clock.advanceTime(1, TimeUnit.SECONDS);
>
> fireRules();
>
> entryPoint1.insert(temp4);
>
> clock.advanceTime(1, TimeUnit.SECONDS);
>
> fireRules();
>
> entryPoint1.insert(temp5);
>
> clock.advanceTime(1, TimeUnit.SECONDS);
>
> fireRules();
>
> entryPoint1.insert(temp6);
>
> fireRules();
>
>
>
>
>
> In my opinion, the rule shouldn't be fired, because as i am (supposedly)
> using the pseudo clock, the events shouldn't fall into the same sliding
> window (1 second.)
>
> In general, the rule should fire when it detects 3 or more temperature
> reads
> with a temperature over 40.
>
> Any idea about what i might be doing wrong?
>
> Thanks in advance!
>
>
>
>
>
>
>
> --
> View this message in context:
> http://drools.46999.n3.nabble.com/Problem-with-time-sliding-windows-and-pseudo-clock-in-Drools-Fusion-5-5-0-tp4027137.html
> Sent from the Drools: User forum mailing list archive at Nabble.com.
> _______________________________________________
> rules-users mailing list
> rules-users@lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-users
>
_______________________________________________
rules-users mailing list
rules-users@lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
