> > I specified the non-existent file (/etc/rygel.confxxxs above) > > but /etc/rygel.conf still got loaded instead - and there was no error > > message related to non-existent file specified? > > If you specify a non-existing file it falls back to the system config > file. >
I suspected that much, but I also expected an error message to say that config file specified does not exist. Actually, I only tried that because alternate conf file I specified appeared to be be ignored (settings in it), and because the output of --help is a bit ambiguous: -c, --config Use configuration file instead of user configuration ... it is not clear if the option accepts a file as parameter, and weather this is to be space delimited or following a equal sign... so I tried to provoke an error message that would reveal this... maybe it should be: -c <file>, --config=<file> Use configuration file instead of user configuration > > --plugin-option=GstLaunch:enabled:true > > This option does not work. > > > It would be very handy to be able to define GstLaunch without a config > file, in a scenario I will use, where I will have one instance of > Rygel for each DLNA device on the network... You can't run multiple instances of Rygel unless you isolate them. > Otherwise they tend to interfere with their description files. > Oh - good to know - this would be a show stopper for me - how do I "isolate" them? By "description files" do you mean "configuration files" or something else? > > > Anyhow, after applying debugging changes as you advised, output of > > attempt to stream to Onkyo is: > > > > (rygel:2108): Rygel-DEBUG: rygel-http-server.vala:151: HTTP GET > > request for URI > > 'http://192.168.1.113:1122/GstLaunch/i/YnVtcGFuZGdyaW5k.mp3'. Headers: > > (rygel:2108): Rygel-DEBUG: rygel-http-server.vala:155: Range : > > bytes=0- > > (rygel:2108): Rygel-DEBUG: rygel-http-server.vala:155: > > transferMode.dlna.org : Streaming > > (rygel:2108): Rygel-DEBUG: rygel-http-server.vala:155: Host : > > 192.168.1.113:1122 > > (rygel:2108): Rygel-DEBUG: rygel-http-server.vala:155: User-Agent : > > Mediabolic-IMHTTP/1.8.225 UPNP/1.0 DLNADOC/1.50 > > (rygel:2108): Rygel-DEBUG: rygel-http-server.vala:136: HTTP GET > > request for URI > > 'http://192.168.1.113:1122/GstLaunch/i/YnVtcGFuZGdyaW5k.mp3' handled. > > > > > > With usual response of dbus.exceptions.DBusException: > > com.intel.RendererServiceUPnP.OperationFailed: Operation failed: > > Resource not found > > This answer is coming from the remote. I think we're in packet capture > land now. > I will do a Wireshark snap and post it back - any preference on format or capture scope? Your help is very much appreciated. Andrej
_______________________________________________ rygel-list mailing list [email protected] https://mail.gnome.org/mailman/listinfo/rygel-list
