Hi Yamahata-san,
Thanks for your quick answer last time! I got the VM image working with GRE
tunnels between the OVSs.
However, in order to fully benefit from Ryu Controller's ability to do L2
separation using OpenFlow, I'd like to set it up without the GRE tunnels
between the OVSs. Below is my topology. I want to confirm with you if this is
possible.
mgmt
+----------------+-----------------+
| | |
V eth0 V V eth0
+----+ +------------------+ +----+
|Ryu1|<===>|Pica8 Open vSwitch|<===>|Ryu2|
+----+ +------------------+ +----+
eth2 eth2
So far, I have confirmed all three OVSs on Ryu1, Ryu2, and Pica8 switch are
registered with Ryu Manager. By setting RYU_EXT_INTERFACE to eth2, stack.sh has
added eth2 to br-int. However, I don't see any traffic over br-int or eth2.
There are still GRE tunnels between the Ryu1 and Ryu2 over the eth0 interfaces.
I am using the VM image from
https://github.com/osrg/ryu/wiki/RYU-OpenStack-Folsom-environment-VM-image-file-HOWTO
Is it possible to customize this image to do what I'm trying to do?
Thanks in advance!
Yue------------------------------------------------------------------------------
Minimize network downtime and maximize team effectiveness.
Reduce network management and security costs.Learn how to hire
the most talented Cisco Certified professionals. Visit the
Employer Resources Portal
http://www.cisco.com/web/learning/employer_resources/index.html
_______________________________________________
Ryu-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ryu-devel
