Signed-off-by: Yuichi Ito <[email protected]>
---
ryu/lib/packet/sctp.py | 76 ++++++++++++++++++++++++------------------------
1 file changed, 38 insertions(+), 38 deletions(-)
diff --git a/ryu/lib/packet/sctp.py b/ryu/lib/packet/sctp.py
index 1b5b9e6..b7755d2 100644
--- a/ryu/lib/packet/sctp.py
+++ b/ryu/lib/packet/sctp.py
@@ -72,7 +72,7 @@ class sctp(packet_base.PacketBase):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -374,7 +374,7 @@ class chunk_data(chunk):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -449,7 +449,7 @@ class chunk_init(chunk_init_base):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -498,7 +498,7 @@ class chunk_init_ack(chunk_init_base):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -547,7 +547,7 @@ class chunk_sack(chunk):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -638,7 +638,7 @@ class chunk_heartbeat(chunk_heartbeat_base):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -680,7 +680,7 @@ class chunk_heartbeat_ack(chunk_heartbeat_base):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -721,7 +721,7 @@ class chunk_abort(chunk):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -795,7 +795,7 @@ class chunk_shutdown(chunk):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -845,7 +845,7 @@ class chunk_shutdown_ack(chunk_ack_base):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -871,7 +871,7 @@ class chunk_error(chunk):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -940,7 +940,7 @@ class chunk_cookie_echo(chunk):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -990,7 +990,7 @@ class chunk_cookie_ack(chunk_ack_base):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1016,7 +1016,7 @@ class chunk_ecn_echo(chunk_ecn_base):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1043,7 +1043,7 @@ class chunk_cwr(chunk_ecn_base):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1071,7 +1071,7 @@ class chunk_shutdown_complete(chunk):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1189,7 +1189,7 @@ class cause_invalid_stream_id(cause_with_value):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1233,7 +1233,7 @@ class cause_missing_param(cause):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1302,7 +1302,7 @@ class cause_stale_cookie(cause_with_value):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1331,7 +1331,7 @@ class cause_out_of_resource(cause):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1371,7 +1371,7 @@ class cause_unresolvable_addr(cause_with_value):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1435,7 +1435,7 @@ class cause_unrecognized_chunk(cause_with_value):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1464,7 +1464,7 @@ class cause_invalid_param(cause):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1504,7 +1504,7 @@ class cause_unrecognized_param(cause_with_value):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1533,7 +1533,7 @@ class cause_no_userdata(cause_with_value):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1564,7 +1564,7 @@ class cause_cookie_while_shutdown(cause):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1605,7 +1605,7 @@ class cause_restart_with_new_addr(cause_with_value):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1677,7 +1677,7 @@ class cause_user_initiated_abort(cause_with_value):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1706,7 +1706,7 @@ class cause_protocol_violation(cause_with_value):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1785,7 +1785,7 @@ class param_heartbeat(param):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1812,7 +1812,7 @@ class param_state_cookie(param):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1839,7 +1839,7 @@ class param_unrecognized_param(param):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1866,7 +1866,7 @@ class param_cookie_preserve(param):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1910,7 +1910,7 @@ class param_ecn(param):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1946,7 +1946,7 @@ class param_host_addr(param):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -1973,7 +1973,7 @@ class param_supported_addr(param):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -2038,7 +2038,7 @@ class param_ipv4(param):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
@@ -2090,7 +2090,7 @@ class param_ipv6(param):
Most of them are same to the on-wire counterparts but in host byte order.
__init__ takes the correspondig args in this order.
- .. tabularcolumns:: |l|p{30em}|l|
+ .. tabularcolumns:: |l|L|
============== =====================================================
Attribute Description
--
1.7.10.4
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk
_______________________________________________
Ryu-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ryu-devel
