Hi jalee,
> (10061) accepted ('10.1.25.52', 53939)
> Unknown action type: METER
> 10.1.25.52 - - [24/Jul/2014 00:58:25] "POST /stats/flowentry/add HTTP/1.1"
> 200 115 0.000730
There is no problem.
When it is set to "actions" below, "Unknown action type:..." appeared on the
console.
* METER
* GOTO_TABLE
* WRITE_METADATA
This is a bug.I will create a patch.
---
This is an additional information,
if you set the action ofctl_rest does not support,the following message will
appear.
(16294) accepted ('127.0.0.1', 51166)
Unknown action type: METERa <--- unnecessary error message (Will be fixed)
Unknown action type: METERa <--- necessary error message
127.0.0.1 - - [24/Jul/2014 12:28:55] "POST /stats/flowentry/add HTTP/1.1" 200
115 0.008108
On Thu, 24 Jul 2014 01:24:13 +0800
jalee wrote:
> Hi Takahashi,
> Thanks.
> I know how to use it right now, but in controller had error message "Unknown
> action type: METER", that's normal?
> BR,
>
> Jalee
>
>
> (10061) accepted ('10.1.25.52', 53939)
> Unknown action type: METER
> 10.1.25.52 - - [24/Jul/2014 00:58:25] "POST /stats/flowentry/add HTTP/1.1"
> 200 115 0.000730
>
>
> -----Original Message-----
> From: jalee [mailto:[email protected]]
> Sent: Thursday, July 24, 2014 12:04 AM
> To: 'Minoru TAKAHASHI'
> Cc: '[email protected]'
> Subject: RE: [Ryu-devel] About meter/qos support real OFS
>
> Hi Takahashi,
> Thanks for your share sample, Yes, I can create meter-entry on the real sw.
> But I don't understand how can use meter-entry apply to some flow-entry?
> Such as:
>
> ==================================I can create meterentry curl -X POST -d
> '{"dpid": "2",
> "meter_id": 1,
> "flags": ["KBPS", "BURST"],
> "bands": [{"type": "DROP", "rate": 1024}]}'
> http://10.1.25.52:8080/stats/meterentry/add
>
> ==================================I can add flowentry curl -X POST -d
> '{"dpid": "2",
> "priority": "10240",
> "match": {}, <--------------but I can't add any more
> field.
> "actions": [{"type": "METER", "meter_id":1}]}'
> http://10.1.25.52:8080/stats/flowentry/add
>
>
> =================================== I want to rate-limit this flow entry.
> Could you tell me how can use above meter in this flow entry?
>
> curl -d '{"cookie": "1",
> "dpid": "2",
> "priority": "10240",
> "match": {"in_port": "46",
> "eth_type": 0x8847,
> "mpls_label": "121"},
> "actions": [{"type": "PUSH_MPLS", "ethertype":0x8847},
> {"type":"SET_FIELD","field":"mpls_label","value":27},
> {"type":"OUTPUT","port":"48"}]}'
> http://10.1.25.52:8080/stats/flowentry/add
>
> Thanks
>
> Jalee
>
>
>
> -----Original Message-----
> From: Minoru TAKAHASHI [mailto:[email protected]]
> Sent: Wednesday, July 23, 2014 2:32 PM
> To: jaleeb
> Cc: [email protected]
> Subject: Re: [Ryu-devel] About meter/qos support real OFS
>
>
> (2014年07月22日 02:43), jalee wrote:
>> Hi.
>> I have question about meter, if I use real openflow switch not OVS,
>> can I use meter/qos function in 3.11 version?
>> I mean just only load "ofctl_rest.py" module.
>
> Yes.
> I think operation of ofctl_rest that's the same in real openflow switch and
> OVS.
>
>> If can support real openflow switch can you share sample restful-api to me?
>
> Please see following examples.
>
> FlowMod with the meter instruction:
>
> flow = {'match': {},
> 'actions': [{'type': 'METER',
> 'meter_id': 1}]
> curl -X POST -d '{"dpid": 1, "match": {}, "actions": [{"type": "METER",
> "meter_id": 1}]}' http://localhost:8080/stats/flowentry/add
>
> MeterMod:
>
> meter = {'meter_id': 1,
> 'flags': 'KBPS',
> 'bands': [{'type': 'DROP',
> 'rate': 1000}]}
> curl -X POST -d '{"dpid": 1, "meter_id": 1, "flags": "KBPS", "bands":
> [{"type": "DROP", "rate": 1000}]}' http://localhost:8080/stats/meterentry/add
>
>> Thanks,
>>
>>
>> Jalee
>>
>>
>>
>>
>> ======================================================================
>> ============== This message may contain information which is private,
>> privileged or confidential of INNO-Tech Network & Service Inc.
>> If you are not the intended recipient of this message, please notify the
>> sender and destroy/delete the message.
>> Any review, retransmission, dissemination or other use of, or taking
>> of any action in reliance upon this information, by persons or entities
>> other than the intended recipient is prohibited.
>> ======================================================================
>> ==============
>>
>>
>>
>> ----------------------------------------------------------------------
>> -------- Want fast and easy access to all the code in your enterprise?
>> Index and search up to 200,000 lines of code with a free copy of Black
>> Duck Code Sight - the same software that powers the world's largest
>> code search on Ohloh, the Black Duck Open Hub! Try it now.
>> http://p.sf.net/sfu/bds
>> _______________________________________________
>> Ryu-devel mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>>
>
>
>
>
> ====================================================================================
> This message may contain information which is private, privileged or
> confidential of INNO-Tech Network & Service Inc.
> If you are not the intended recipient of this message, please notify the
> sender and destroy/delete the message.
> Any review, retransmission, dissemination or other use of, or taking of any
> action in reliance upon this information,
> by persons or entities other than the intended recipient is prohibited.
> ====================================================================================
>
>
>
------------------------------------------------------------------------------
Want fast and easy access to all the code in your enterprise? Index and
search up to 200,000 lines of code with a free copy of Black Duck
Code Sight - the same software that powers the world's largest code
search on Ohloh, the Black Duck Open Hub! Try it now.
http://p.sf.net/sfu/bds
_______________________________________________
Ryu-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ryu-devel
