| Hi, I want to test an HP switch and I am using the Ryu Switch Test Tool. My configuration is the following and shown in the attached pdf: I am using an Open vSwitch as a tester switch and a server hosts both the Open vSwitch and the Ryu test. I use three physical ethernet interfaces of the server to connected the HP switch. These three physical interfaces of the server are assigned to the Open vSwitch instance. Both the Open vSwitch and HP switches are connected to the management network to communicate with the controller. The test works (e.g., Switch connected, some tests are ok, other fails…), but I do not really if this configuration is correct and if the OvS can influence the result of the test. Thanks and best regards, |
ryu-test.pdf
Description: Adobe PDF document
Michele Santuari CREATE-NET Junior Research Engineer Via alla Cascata 56/D - 38123 Povo Trento (Italy) e-mail: [email protected] Tel: (+39) 0461 408400 - interno/extension 1341 Skype: s4nto.m -------------------------------------------------------- The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited according to the Italian Law 196/2003 of the Legislature. If you received this in error, please contact the sender and delete the material from any computer. |
------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________ Ryu-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ryu-devel
