Signed-off-by: IWASE Yusuke <[email protected]>
---
doc/source/app/ofctl_rest.rst | 106 +++++++++++++++++++++---------------------
1 file changed, 53 insertions(+), 53 deletions(-)
diff --git a/doc/source/app/ofctl_rest.rst b/doc/source/app/ofctl_rest.rst
index 1b9170f..3437e44 100644
--- a/doc/source/app/ofctl_rest.rst
+++ b/doc/source/app/ofctl_rest.rst
@@ -107,24 +107,24 @@ Get all flows stats
Response message body:
- ============== =========================================
===============
- Attribute Description Example
- ============== =========================================
===============
- dpid Datapath ID "1"
- length Length of this entry 88
- table_id Table ID 0
- duration_sec Time flow has been alive in seconds 2
- duration_nsec Time flow has been alive in nanoseconds 6.76e+08
- priority Priority of the entry 11111
- idle_timeout Number of seconds idle before expiration 0
- hard_timeout Number of seconds before expiration 0
- flags Bitmap of OFPFF_* flags 1
- cookie Opaque controller-issued identifier 1
- packet_count Number of packets in flow 0
- byte_count Number of bytes in flow 0
- match Fields to match {"in_port": 1}
- actions Instruction set ["OUTPUT:2"]
- ============== =========================================
===============
+ ==============
============================================================ ===============
+ Attribute Description
Example
+ ==============
============================================================ ===============
+ dpid Datapath ID
"1"
+ length Length of this entry
88
+ table_id Table ID
0
+ duration_sec Time flow has been alive in seconds
2
+ duration_nsec Time flow has been alive in nanoseconds beyond
duration_sec 6.76e+08
+ priority Priority of the entry
11111
+ idle_timeout Number of seconds idle before expiration
0
+ hard_timeout Number of seconds before expiration
0
+ flags Bitmap of OFPFF_* flags
1
+ cookie Opaque controller-issued identifier
1
+ packet_count Number of packets in flow
0
+ byte_count Number of bytes in flow
0
+ match Fields to match
{"in_port": 1}
+ actions Instruction set
["OUTPUT:2"]
+ ==============
============================================================ ===============
Example of use::
@@ -239,26 +239,26 @@ Get ports stats
Response message body:
- ============== ======================================== =========
- Attribute Description Example
- ============== ======================================== =========
- dpid Datapath ID "1"
- port_no Port number 1
- rx_packets Number of received packets 9
- tx_packets Number of transmitted packets 6
- rx_bytes Number of received bytes 738
- tx_bytes Number of transmitted bytes 252
- rx_dropped Number of packets dropped by RX 0
- tx_dropped Number of packets dropped by TX 0
- rx_errors Number of receive errors 0
- tx_errors Number of transmit errors 0
- rx_frame_err Number of frame alignment errors 0
- rx_over_err Number of packets with RX overrun 0
- rx_crc_err Number of CRC errors 0
- collisions Number of collisions 0
- duration_sec Time port has been alive in seconds 12
- duration_nsec Time port has been alive in nanoseconds 9.76e+08
- ============== ======================================== =========
+ ==============
============================================================ =========
+ Attribute Description
Example
+ ==============
============================================================ =========
+ dpid Datapath ID
"1"
+ port_no Port number
1
+ rx_packets Number of received packets
9
+ tx_packets Number of transmitted packets
6
+ rx_bytes Number of received bytes
738
+ tx_bytes Number of transmitted bytes
252
+ rx_dropped Number of packets dropped by RX
0
+ tx_dropped Number of packets dropped by TX
0
+ rx_errors Number of receive errors
0
+ tx_errors Number of transmit errors
0
+ rx_frame_err Number of frame alignment errors
0
+ rx_over_err Number of packets with RX overrun
0
+ rx_crc_err Number of CRC errors
0
+ collisions Number of collisions
0
+ duration_sec Time port has been alive in seconds
12
+ duration_nsec Time port has been alive in nanoseconds beyond
duration_sec 9.76e+08
+ ==============
============================================================ =========
Example of use::
@@ -379,7 +379,7 @@ Get groups stats
packet_count Number of packets processed by group
0
byte_count Number of bytes processed by group
0
duration_sec Time group has been alive in seconds
161
- duration_nsec Time group has been alive in nanoseconds
3.03e+08
+ duration_nsec Time group has been alive in nanoseconds beyond
duration_sec 3.03e+08
bucket_stats struct ofp_bucket_counter
-- packet_count Number of packets processed by bucket
0
-- byte_count Number of bytes processed by bucket
0
@@ -571,21 +571,21 @@ Get meters stats
Response message body:
- ===================== =========================================
========
- Attribute Description Example
- ===================== =========================================
========
- dpid Datapath ID "1"
- meter_id Meter ID 1
- len Length in bytes of this stats 56
- flow_count Number of flows bound to meter 0
- packet_in_count Number of packets in input 0
- byte_in_count Number of bytes in input 0
- duration_sec Time meter has been alive in seconds 37
- duration_nsec Time meter has been alive in nanoseconds 988000
+ =====================
============================================================= ========
+ Attribute Description
Example
+ =====================
============================================================= ========
+ dpid Datapath ID
"1"
+ meter_id Meter ID
1
+ len Length in bytes of this stats
56
+ flow_count Number of flows bound to meter
0
+ packet_in_count Number of packets in input
0
+ byte_in_count Number of bytes in input
0
+ duration_sec Time meter has been alive in seconds
37
+ duration_nsec Time meter has been alive in nanoseconds beyond
duration_sec 988000
band_stats struct ofp_meter_band_stats
- -- packet_band_count Number of packets in band 0
- -- byte_band_count Number of bytes in band 0
- ===================== =========================================
========
+ -- packet_band_count Number of packets in band
0
+ -- byte_band_count Number of bytes in band
0
+ =====================
============================================================= ========
Example of use::
--
1.9.1
------------------------------------------------------------------------------
New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
GigeNET is offering a free month of service with a new server in Ashburn.
Choose from 2 high performing configs, both with 100TB of bandwidth.
Higher redundancy.Lower latency.Increased capacity.Completely compliant.
http://p.sf.net/sfu/gigenet
_______________________________________________
Ryu-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ryu-devel
