Hi, Please try to run the following command.
$ cd ~/ovs $ sudo make distclean $ git pull $ ./boot.sh $ ./configure --with-linux=/lib/modules/`uname -r`/build $ make && sudo make install && sudo make modules_install && sudo depmod $ sudo rm -f /usr/local/etc/openvswitch/conf.db /usr/local/etc/openvswitch/.conf.db.~lock~ $ sudo ovsdb-tool create /usr/local/etc/openvswitch/conf.db vswitchd/vswitch.ovsschema Thanks, On 2016年03月11日 11:57, Talal Al wrote: > Sorry, > > It's (2.3.90). > > How can it be upgraded to the version you mention ? > > Thanks. > > > To: [email protected]; [email protected] > > From: [email protected] > > Date: Fri, 11 Mar 2016 11:47:57 +0900 > > Subject: Re: [Ryu-devel] Bad argument in SET_FIELD action (Code=15) > > > > Hi, > > > > > I've tried OpenFlow 1.3, 1.4 and 1.5. None of them works > > > > You've got me wrong. > > Do not misunderstand the version of the OpenFlow version and Open > > vSwitch version? > > I pointed out version of the Open vSwitch. > > Please check the version of the Open vSwitch in the following command. > > > > $ sudo ovs-vsctl --version > > > > > > Thanks, > > > > On 2016年03月11日 11:23, Talal Al wrote: > > > I've tried OpenFlow 1.3, 1.4 and 1.5. None of them works > > > > > > > To: [email protected]; [email protected] > > > > From: [email protected] > > > > Date: Fri, 11 Mar 2016 11:19:35 +0900 > > > > Subject: Re: [Ryu-devel] Bad argument in SET_FIELD action (Code=15) > > > > > > > > Hi > > > > > > > > Sorry for the late relpy. > > > > > > > > > > > > > When I wanted set up fields such as eth_type, ip_proto, > icmpv6_type, > > > > > icmpv6_code as shown below, I still got the error " Bad arguement" > > > (code > > > > > 15), however the rest is fine such as ipv6_dst, ipv6_src. > > > > > > > > Maybe, version of the Open vSwitch does not may be a problem. > > > > What is the version of the Open vSwitch you are useing? > > > > Running without any problems with the following settings in the > latest > > > > version (2.5.90) of the Open vSwitch. > > > > > > > > > > > > https://github.com/osrg/ryu/blob/master/ryu/tests/switch/of13/action/25_SET_FIELD/29_ICMPV6_TYPE.json#L4-L74 > > > > > > > > https://github.com/osrg/ryu/blob/master/ryu/tests/switch/of13/action/25_SET_FIELD/30_ICMPV6_CODE.json#L4-L73 > > > > > > > > Please try to check the operation by using the latest version > (2.5.90) > > > > of the Open vSwitch. > > > > > > > > > > > > Thanks, > > > > > > > > On 2016年03月10日 08:03, Talal Al wrote: > > > > > I've tried what is being suggested but without luck. > > > > > > > > > > When I wanted set up fields such as eth_type, ip_proto, > icmpv6_type, > > > > > icmpv6_code as shown below, I still got the error " Bad arguement" > > > (code > > > > > 15), however the rest is fine such as ipv6_dst, ipv6_src. > > > > > > > > > > Could you please advise me on this ? > > > > > > > > > > OFPActionSetField(eth_type=34525)) > > > > > OFPActionSetField(ip_proto=58)) > > > > > OFPActionSetField(icmpv6_type=128)) > > > > > OFPActionSetField(icmpv6_code=0)) > > > > > > > > > > > From: [email protected] > > > > > > Date: Wed, 9 Mar 2016 19:25:34 +1000 > > > > > > To: [email protected] > > > > > > CC: [email protected] > > > > > > Subject: Re: [Ryu-devel] Bad argument in SET_FIELD action > (Code=15) > > > > > > > > > > > > Thanks Shinpei, > > > > > > > > > > > > I'll change the values accordingly, but what's the correct > value for > > > > > neighbor solicitation and neighbor advertisement ? > > > > > > > > > > > > Cheers, > > > > > > Talal > > > > > > > On Mar 9, 2016, at 6:08 PM, Shinpei Muraoka > > > > > <[email protected]> wrote: > > > > > > > > > > > > > > Hi > > > > > > > > > > > > > > > I've installed rules on the Openflow switch(v 1.3) to set > > > fields, and > > > > > > > > I've not faced any problem until I tried to set icmpv6_type, > > > > > icmp6_code, > > > > > > > > I got "error msg ev version: 0x4 msg_type 0x1 xid 0x250d815d > > > > > > > > > > > > > > > > > OFPErrorMsg(code=15,data='\x04\x0e\x00\xc8%\r\x81]\x00\x00\x00\x00\x00...". > > > > > > > > When I refered to the spec 1.3, code#15 is "Bad argument in > > > SET_FIELD > > > > > > > > action". I tried serveral ways but without luck. > > > > > > > > > > > > > > Do you set the following values for match field when using the > > > > > icmpv6_type or icmpv6_code? > > > > > > > - "eth_type":34525 > > > > > > > - "ip_proto":58 > > > > > > > - "icmpv6_type":128 > > > > > > > - "icmpv6_code":0 > > > > > > > > > > > > > > If you set at the same value as the icmpv4_type and > icmpv4_code, > > > > > > > please correct the value. > > > > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > > >> On 2016年03月09日 09:41, Talal Al wrote: > > > > > > >> Dear All, > > > > > > >> > > > > > > >> I've installed rules on the Openflow switch(v 1.3) to set > > > fields, and > > > > > > >> I've not faced any problem until I tried to set icmpv6_type, > > > > > icmp6_code, > > > > > > >> I got "error msg ev version: 0x4 msg_type 0x1 xid 0x250d815d > > > > > > >> > > > > > > > > > OFPErrorMsg(code=15,data='\x04\x0e\x00\xc8%\r\x81]\x00\x00\x00\x00\x00...". > > > > > > >> When I refered to the spec 1.3, code#15 is "Bad argument in > > > SET_FIELD > > > > > > >> action". I tried serveral ways but without luck. > > > > > > >> > > > > > > >> Could you please advise me what to do in order to set these > > > fields ? > > > > > > >> > > > > > > >> Cheers, > > > > > > >> Talal > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > > > > ------------------------------------------------------------------------------ > > > > > > >> Transform Data into Opportunity. > > > > > > >> Accelerate data analysis in your applications with > > > > > > >> Intel Data Analytics Acceleration Library. > > > > > > >> Click to learn more. > > > > > > >> > http://pubads.g.doubleclick.net/gampad/clk?id=278785111&iu=/4140 > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> _______________________________________________ > > > > > > >> Ryu-devel mailing list > > > > > > >> [email protected] > > > > > > >> https://lists.sourceforge.net/lists/listinfo/ryu-devel > > > > > > >> > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > > Transform Data into Opportunity. > > > > > > Accelerate data analysis in your applications with > > > > > > Intel Data Analytics Acceleration Library. > > > > > > Click to learn more. > > > > > > http://pubads.g.doubleclick.net/gampad/clk?id=278785111&iu=/4140 > > > > > > _______________________________________________ > > > > > > Ryu-devel mailing list > > > > > > [email protected] > > > > > > https://lists.sourceforge.net/lists/listinfo/ryu-devel > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > Transform Data into Opportunity. > > > > Accelerate data analysis in your applications with > > > > Intel Data Analytics Acceleration Library. > > > > Click to learn more. > > > > http://pubads.g.doubleclick.net/gampad/clk?id=278785111&iu=/4140 > > > > _______________________________________________ > > > > Ryu-devel mailing list > > > > [email protected] > > > > https://lists.sourceforge.net/lists/listinfo/ryu-devel > > > > > ------------------------------------------------------------------------------ > > Transform Data into Opportunity. > > Accelerate data analysis in your applications with > > Intel Data Analytics Acceleration Library. > > Click to learn more. > > http://pubads.g.doubleclick.net/gampad/clk?id=278785111&iu=/4140 > > _______________________________________________ > > Ryu-devel mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/ryu-devel ------------------------------------------------------------------------------ Transform Data into Opportunity. Accelerate data analysis in your applications with Intel Data Analytics Acceleration Library. Click to learn more. http://pubads.g.doubleclick.net/gampad/clk?id=278785111&iu=/4140 _______________________________________________ Ryu-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ryu-devel
