I've managed to update the openvswitch to 2.5.0, but still I'm getting the same
error (Bad argument in SET_FIELD action (Code=15)
Any suggestion ??
Cheers,
Talal
> To: [email protected]; [email protected]
> From: [email protected]
> Date: Mon, 14 Mar 2016 12:02:29 +0900
> Subject: Re: [Ryu-devel] Bad argument in SET_FIELD action (Code=15)
>
> Hi,
>
> Please keep mailing list.
>
>
> > Thank you ,but last command did not work "No such file or dirctory"
>
> What kind of file or directory you do not exist?
>
> If do you not exist "/usr/local/etc/openvswitch/", please try to run the
> following command.
>
> $ mkdir -p /usr/local/etc/openvswitch
>
>
> If you have failed to remove the
> "/usr/local/etc/openvswitch/.conf.db.~lock~".
> "/usr/local/etc/openvswitch/.conf.db.~lock~" is a lock file of DB,so no
> problem.
>
>
> Please refer to the below for Open vSwitch installation instructions.
> https://github.com/openvswitch/ovs/blob/master/INSTALL.md
>
> Thanks,
>
> On 2016年03月11日 12:57, Talal Al wrote:
> > Thank you ,but last command did not work "No such file or dirctory"
> >
> > And when I try MIninet did not work too
> >
> > > To: [email protected]; [email protected]
> > > From: [email protected]
> > > Date: Fri, 11 Mar 2016 12:05:32 +0900
> > > Subject: Re: [Ryu-devel] Bad argument in SET_FIELD action (Code=15)
> > >
> > > Hi,
> > >
> > > Please try to run the following command.
> > >
> > > $ cd ~/ovs
> > > $ sudo make distclean
> > > $ git pull
> > > $ ./boot.sh
> > > $ ./configure --with-linux=/lib/modules/`uname -r`/build
> > > $ make && sudo make install && sudo make modules_install && sudo depmod
> > > $ sudo rm -f /usr/local/etc/openvswitch/conf.db
> > > /usr/local/etc/openvswitch/.conf.db.~lock~
> > > $ sudo ovsdb-tool create /usr/local/etc/openvswitch/conf.db
> > > vswitchd/vswitch.ovsschema
> > >
> > >
> > > Thanks,
> > >
> > > On 2016年03月11日 11:57, Talal Al wrote:
> > > > Sorry,
> > > >
> > > > It's (2.3.90).
> > > >
> > > > How can it be upgraded to the version you mention ?
> > > >
> > > > Thanks.
> > > >
> > > > > To: [email protected]; [email protected]
> > > > > From: [email protected]
> > > > > Date: Fri, 11 Mar 2016 11:47:57 +0900
> > > > > Subject: Re: [Ryu-devel] Bad argument in SET_FIELD action (Code=15)
> > > > >
> > > > > Hi,
> > > > >
> > > > > > I've tried OpenFlow 1.3, 1.4 and 1.5. None of them works
> > > > >
> > > > > You've got me wrong.
> > > > > Do not misunderstand the version of the OpenFlow version and Open
> > > > > vSwitch version?
> > > > > I pointed out version of the Open vSwitch.
> > > > > Please check the version of the Open vSwitch in the following
> > command.
> > > > >
> > > > > $ sudo ovs-vsctl --version
> > > > >
> > > > >
> > > > > Thanks,
> > > > >
> > > > > On 2016年03月11日 11:23, Talal Al wrote:
> > > > > > I've tried OpenFlow 1.3, 1.4 and 1.5. None of them works
> > > > > >
> > > > > > > To: [email protected]; [email protected]
> > > > > > > From: [email protected]
> > > > > > > Date: Fri, 11 Mar 2016 11:19:35 +0900
> > > > > > > Subject: Re: [Ryu-devel] Bad argument in SET_FIELD action
> > (Code=15)
> > > > > > >
> > > > > > > Hi
> > > > > > >
> > > > > > > Sorry for the late relpy.
> > > > > > >
> > > > > > >
> > > > > > > > When I wanted set up fields such as eth_type, ip_proto,
> > > > icmpv6_type,
> > > > > > > > icmpv6_code as shown below, I still got the error " Bad
> > arguement"
> > > > > > (code
> > > > > > > > 15), however the rest is fine such as ipv6_dst, ipv6_src.
> > > > > > >
> > > > > > > Maybe, version of the Open vSwitch does not may be a problem.
> > > > > > > What is the version of the Open vSwitch you are useing?
> > > > > > > Running without any problems with the following settings in the
> > > > latest
> > > > > > > version (2.5.90) of the Open vSwitch.
> > > > > > >
> > > > > > >
> > > > > >
> > > >
> > https://github.com/osrg/ryu/blob/master/ryu/tests/switch/of13/action/25_SET_FIELD/29_ICMPV6_TYPE.json#L4-L74
> > > > > > >
> > > > > >
> > > >
> > https://github.com/osrg/ryu/blob/master/ryu/tests/switch/of13/action/25_SET_FIELD/30_ICMPV6_CODE.json#L4-L73
> > > > > > >
> > > > > > > Please try to check the operation by using the latest version
> > > > (2.5.90)
> > > > > > > of the Open vSwitch.
> > > > > > >
> > > > > > >
> > > > > > > Thanks,
> > > > > > >
> > > > > > > On 2016年03月10日 08:03, Talal Al wrote:
> > > > > > > > I've tried what is being suggested but without luck.
> > > > > > > >
> > > > > > > > When I wanted set up fields such as eth_type, ip_proto,
> > > > icmpv6_type,
> > > > > > > > icmpv6_code as shown below, I still got the error " Bad
> > arguement"
> > > > > > (code
> > > > > > > > 15), however the rest is fine such as ipv6_dst, ipv6_src.
> > > > > > > >
> > > > > > > > Could you please advise me on this ?
> > > > > > > >
> > > > > > > > OFPActionSetField(eth_type=34525))
> > > > > > > > OFPActionSetField(ip_proto=58))
> > > > > > > > OFPActionSetField(icmpv6_type=128))
> > > > > > > > OFPActionSetField(icmpv6_code=0))
> > > > > > > >
> > > > > > > > > From: [email protected]
> > > > > > > > > Date: Wed, 9 Mar 2016 19:25:34 +1000
> > > > > > > > > To: [email protected]
> > > > > > > > > CC: [email protected]
> > > > > > > > > Subject: Re: [Ryu-devel] Bad argument in SET_FIELD action
> > > > (Code=15)
> > > > > > > > >
> > > > > > > > > Thanks Shinpei,
> > > > > > > > >
> > > > > > > > > I'll change the values accordingly, but what's the correct
> > > > value for
> > > > > > > > neighbor solicitation and neighbor advertisement ?
> > > > > > > > >
> > > > > > > > > Cheers,
> > > > > > > > > Talal
> > > > > > > > > > On Mar 9, 2016, at 6:08 PM, Shinpei Muraoka
> > > > > > > > <[email protected]> wrote:
> > > > > > > > > >
> > > > > > > > > > Hi
> > > > > > > > > >
> > > > > > > > > > > I've installed rules on the Openflow switch(v 1.3) to set
> > > > > > fields, and
> > > > > > > > > > > I've not faced any problem until I tried to set
> > icmpv6_type,
> > > > > > > > icmp6_code,
> > > > > > > > > > > I got "error msg ev version: 0x4 msg_type 0x1 xid
> > 0x250d815d
> > > > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> > OFPErrorMsg(code=15,data='\x04\x0e\x00\xc8%\r\x81]\x00\x00\x00\x00\x00...".
> > > > > > > > > > > When I refered to the spec 1.3, code#15 is "Bad
> > argument in
> > > > > > SET_FIELD
> > > > > > > > > > > action". I tried serveral ways but without luck.
> > > > > > > > > >
> > > > > > > > > > Do you set the following values for match field when
> > using the
> > > > > > > > icmpv6_type or icmpv6_code?
> > > > > > > > > > - "eth_type":34525
> > > > > > > > > > - "ip_proto":58
> > > > > > > > > > - "icmpv6_type":128
> > > > > > > > > > - "icmpv6_code":0
> > > > > > > > > >
> > > > > > > > > > If you set at the same value as the icmpv4_type and
> > > > icmpv4_code,
> > > > > > > > > > please correct the value.
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Thanks,
> > > > > > > > > >
> > > > > > > > > >> On 2016年03月09日 09:41, Talal Al wrote:
> > > > > > > > > >> Dear All,
> > > > > > > > > >>
> > > > > > > > > >> I've installed rules on the Openflow switch(v 1.3) to set
> > > > > > fields, and
> > > > > > > > > >> I've not faced any problem until I tried to set
> > icmpv6_type,
> > > > > > > > icmp6_code,
> > > > > > > > > >> I got "error msg ev version: 0x4 msg_type 0x1 xid
> > 0x250d815d
> > > > > > > > > >>
> > > > > > > >
> > > > > >
> > > >
> > OFPErrorMsg(code=15,data='\x04\x0e\x00\xc8%\r\x81]\x00\x00\x00\x00\x00...".
> > > > > > > > > >> When I refered to the spec 1.3, code#15 is "Bad
> > argument in
> > > > > > SET_FIELD
> > > > > > > > > >> action". I tried serveral ways but without luck.
> > > > > > > > > >>
> > > > > > > > > >> Could you please advise me what to do in order to set
> > these
> > > > > > fields ?
> > > > > > > > > >>
> > > > > > > > > >> Cheers,
> > > > > > > > > >> Talal
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > >
> > > > > >
> > > >
> > ------------------------------------------------------------------------------
> > > > > > > > > >> Transform Data into Opportunity.
> > > > > > > > > >> Accelerate data analysis in your applications with
> > > > > > > > > >> Intel Data Analytics Acceleration Library.
> > > > > > > > > >> Click to learn more.
> > > > > > > > > >>
> > > > http://pubads.g.doubleclick.net/gampad/clk?id=278785111&iu=/4140
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >> _______________________________________________
> > > > > > > > > >> Ryu-devel mailing list
> > > > > > > > > >> [email protected]
> > > > > > > > > >> https://lists.sourceforge.net/lists/listinfo/ryu-devel
> > > > > > > > > >>
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> > ------------------------------------------------------------------------------
> > > > > > > > > Transform Data into Opportunity.
> > > > > > > > > Accelerate data analysis in your applications with
> > > > > > > > > Intel Data Analytics Acceleration Library.
> > > > > > > > > Click to learn more.
> > > > > > > > >
> > http://pubads.g.doubleclick.net/gampad/clk?id=278785111&iu=/4140
> > > > > > > > > _______________________________________________
> > > > > > > > > Ryu-devel mailing list
> > > > > > > > > [email protected]
> > > > > > > > > https://lists.sourceforge.net/lists/listinfo/ryu-devel
> > > > > > >
> > > > > > >
> > > > > >
> > > >
> > ------------------------------------------------------------------------------
> > > > > > > Transform Data into Opportunity.
> > > > > > > Accelerate data analysis in your applications with
> > > > > > > Intel Data Analytics Acceleration Library.
> > > > > > > Click to learn more.
> > > > > > > http://pubads.g.doubleclick.net/gampad/clk?id=278785111&iu=/4140
> > > > > > > _______________________________________________
> > > > > > > Ryu-devel mailing list
> > > > > > > [email protected]
> > > > > > > https://lists.sourceforge.net/lists/listinfo/ryu-devel
> > > > >
> > > > >
> > > >
> > ------------------------------------------------------------------------------
> > > > > Transform Data into Opportunity.
> > > > > Accelerate data analysis in your applications with
> > > > > Intel Data Analytics Acceleration Library.
> > > > > Click to learn more.
> > > > > http://pubads.g.doubleclick.net/gampad/clk?id=278785111&iu=/4140
> > > > > _______________________________________________
> > > > > Ryu-devel mailing list
> > > > > [email protected]
> > > > > https://lists.sourceforge.net/lists/listinfo/ryu-devel
> > >
> > >
> > ------------------------------------------------------------------------------
> > > Transform Data into Opportunity.
> > > Accelerate data analysis in your applications with
> > > Intel Data Analytics Acceleration Library.
> > > Click to learn more.
> > > http://pubads.g.doubleclick.net/gampad/clk?id=278785111&iu=/4140
> > > _______________________________________________
> > > Ryu-devel mailing list
> > > [email protected]
> > > https://lists.sourceforge.net/lists/listinfo/ryu-devel
>
> ------------------------------------------------------------------------------
> Transform Data into Opportunity.
> Accelerate data analysis in your applications with
> Intel Data Analytics Acceleration Library.
> Click to learn more.
> http://pubads.g.doubleclick.net/gampad/clk?id=278785231&iu=/4140
> _______________________________________________
> Ryu-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/ryu-devel
------------------------------------------------------------------------------
Transform Data into Opportunity.
Accelerate data analysis in your applications with
Intel Data Analytics Acceleration Library.
Click to learn more.
http://pubads.g.doubleclick.net/gampad/clk?id=278785231&iu=/4140
_______________________________________________
Ryu-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ryu-devel
