Hi, Mahdieh
You can use "ofproto.OFPP_IN_PORT" to do it.
actions = [parser.OFPActionOutput(ofproto.OFPP_IN_PORT)]
self.add_flow(datapath, 0, match, actions)
Then, the flow shown below will be installed.
$ovs-ofctl -O OpenFlow13 dump-flows s1
OFPST_FLOW reply (OF1.3) (xid=0x2): cookie=0x0, duration=2.975s,
table=0, n_packets=13, n_bytes=1026, priority=0 actions=IN_PORT
Thanks,
Fujimoto
On 2017年06月22日 16:30, Mahdieh Shariat wrote:
Hi,
I want an ovs switch outputs a packet to its receiving port, but in
ovs doc I read:
actions=[action][,action...]
port
output:port
Outputs the packet to OpenFlow port number port.
If port is the packet's input port, the packet is not output.
so with bellow Ryu code:
» actions = [ofproto_parser.OFPActionOutput(output_port)]
when input_port== output_port, the packet is dropped.
I find a new action in ovs :
in_port
Outputs the packet on the port from which
it was
received.
but I can't find this action in Ryu... could you please help me to
write a code like this:
» if (in_port == port):
actions=[ofproto_parser.OFPActionInPort()]
I'm using ovs 2.7 and openflow 1.3
Thanks in advance
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Ryu-devel mailing list
Ryu-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ryu-devel
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Ryu-devel mailing list
Ryu-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ryu-devel
