Please Ignore this email
Its not complete.
Thanks!
On Fri, Nov 24, 2017 at 10:41 PM, Taha Khan <mailfort...@gmail.com> wrote:
> Hi Iwase,
>
> I have a triangle topology as shown below. I have followed steps as shown
> in RYU documentation and the interface router addresses are also same
> except I have added a link between s1 [2] to s3[2] interfaces as shown
> below.
>
> [image: Inline image 1]
>
> Router Interface 1 Interface 2 Interface 3
> s1 172.16.20.1/24 172.16.40.1/24 172.16.30.30/24
> s2 172.16.10.1 172.16.30.1 192.168.10.1
> s3 192.168.30.1 172.16.40.2 192.168.10.20
>
> I have configured routes as following so that router s1 to s3 should be
> able to route via link between them as shown below.
> *For Router S1 --*
> "route": [
> {
> "route_id": 3,
> "destination": "0.0.0.0/0",
> "gateway": "172.16.40.2"
> },
> {
> "route_id": 2,
> "destination": "172.16.10.0/24",
> "gateway": "172.16.30.1"
> }
> ],
> *For Router S2*
>
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Ryu-devel mailing list
Ryu-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ryu-devel
