Hi Vasu,
> OFPT_FLOW_MOD (OF1.3) (xid=0x6accfc95): ***decode error:
> OFPBAC_MATCH_INCONSISTENT***
> OFPT_ERROR (OF1.3) (xid=0x6accfc95): OFPBAC_MATCH_INCONSISTENT
> OFPT_FLOW_MOD (OF1.3) (xid=0x6accfc95):
The following messages shows that the match is inconsistent with the given
actions and the FlowMod could not be accepted.
The OpenFlow Spec 1.3.5 says on "6.4 Flow Table Modification Messages" section;
====
If an action in a flow mod message performs an operation which is inconsistent
with the match and prior
actions of the flow entry, for example, a pop VLAN action with a match
specifying no VLAN, or a set
TTL action with a match wildcarding the Ethertype, the switch may optionally
reject the flow mod and
immediately return an ofp_error_msg with OFPET_BAD_ACTION type and
OFPBAC_MATCH_INCONSISTENT
code.
===
So you need to add the "vlan_vid" match field, for example;
vlan_vid=(ofproto_v1_3.OFPVID_PRESENT, ofproto_v1_3.OFPVID_PRESENT)
in the arguments for OFPMatch().
For the combination of the value/mask for the "vlan_vid" match field, please
refer to the "NOTE" section at the following.
http://ryu.readthedocs.io/en/latest/ofproto_v1_3_ref.html#flow-match-structure
FYI, if you specify "--verbose" option for "ryu-manager" the warning messages
, which is similar to that of "ovs-ofctl snoop", should be displayed.
Thanks,
Iwase
On 2018年01月12日 01:25, Vasu Dasari wrote:
Can someone please help with a recipe on how to delete a VLAN tag if it exists
in the packet? I want to do this OpenFlow version >1.3? Note that I could
achieve with OF 1.0 and Ryu as highlighted below.
I tried the following code:
ofp_parser = ofproto_v1_3_parser
actions = [
ofp_parser.OFPActionPopVlan(),
ofp_parser.OFPActionSetField(vlan_vid=ofproto_v1_3.OFPVID_PRESENT |
100),
ofp_parser.OFPActionOutput(3, 0)
]
match = ofp_parser.OFPMatch(in_port=1)
inst = [
ofp_parser.OFPInstructionActions(ofp.OFPIT_APPLY_ACTIONS, actions)
]
m = ofp_parser.OFPFlowMod(self.dp, 0x1234, 0, 0, ofp.OFPFC_ADD, 0,
0, 100, UINT32_MAX, ofp.OFPP_ANY,
ofp.OFPG_ANY, 0, match, inst)
This results in following error in OVS (got this from using "ovs-ofctl snoop s1
--detach"):
OFPT_FLOW_MOD (OF1.3) (xid=0x6accfc95): ***decode error:
OFPBAC_MATCH_INCONSISTENT***
OFPT_ERROR (OF1.3) (xid=0x6accfc95): OFPBAC_MATCH_INCONSISTENT
OFPT_FLOW_MOD (OF1.3) (xid=0x6accfc95):
(***truncated to 64 bytes from 112***)
00000000 04 0e 00 70 6a cc fc 95-00 00 00 00 00 00 12 34 |...pj..........4|
00000010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 64 |...............d|
00000020 ff ff ff ff ff ff ff ff-ff ff ff ff 00 00 00 00 |................|
00000030 00 01 00 0c 80 00 00 04-00 00 00 01 00 00 00 00 |................|
If I use ofproto_v1_1_parser, I could create the flow
actions = [
ofp_parser.OFPActionStripVlan(),
ofp_parser.OFPActionVlanVid(100),
ofp_parser.OFPActionOutput(3, 0)
]
match = ofp_parser.OFPMatch(in_port=1)
m = ofp_parser.OFPFlowMod(self.dp, match, 0x1234, ofp.OFPFC_ADD,
priority=100, actions=actions)
From ovs-ofctl dump-flows:
cookie=0x1234, duration=849.909s, table=0, n_packets=14, n_bytes=1008,
reset_counts priority=100,in_port="s1-eth1"
actions=pop_vlan,push_vlan:0x8100,set_field:4196->vlan_vid,output:"s1-eth3"
Thanks,
-Vasu
*Vasu Dasari*
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Ryu-devel mailing list
Ryu-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ryu-devel
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Ryu-devel mailing list
Ryu-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ryu-devel
